-
- How can I connect to the Team Foundation server?
by phamdachoang
- 2 Replies
- Last post
by ravi_pune
- I installed Microsoft Team Foundation Server for Deverlopers in machine A (server).
After that, I installed team foundation exlporer in machine B
When connected to machine A from B, it cause theres errors here:
1. FTF31002 http:\\192.168.10.41
- May be the team servername, port number or protocol is incorrect
-Team Foundation server is offline
-Password is expired or incorrect
-
- Excel VBA Macro Problem
by Otaking
- 1 Replies
- Last post
by Shasur
- I am having a problem with some macro. The thing is i need a macro that reads a .txt file, and checks if certain conditions are met.
The code i use to read the file is:
Code Snippet Open "c:\textfile.TXT" For Input As 1
The thing is, that when i try to validate the amount of blank spaces before a line, it doesn't read them. I saw too that the output of the txt file in the
-
- font substitution issue!!
by VNAHATA
- 1 Replies
- Last post
by orcmid
- Hi I have an issue with font substitution.I have an italic text which uses Arial as its font.I have been combining font's name along with its style to get its PSname which i use for further processing.However there are cases where a glyph might be present in Arial and not present in ArialItalic.Also there are cases where corresponding to same glypid in both the fonts,the glyphs vary.Is there any w
-
- Events
by rtmos
- 0 Replies
- Last post
by rtmos
- Could someone please point me to an article defining all the (access) form-related events and the sequence in which they occur. Thank you
-
- SQL Express 2005 Expiration
by ISRI
- 4 Replies
- Last post
by ISRI
- Hello,
I downloaded SQL 2005 Express from the microsoft website and I have browsed for an expiration date of the software but haven't found one. So just to be safe, does anyone know if this software is only a trial period and has an expiration date or if the usage is unlimited
-
- include crm3.0 accounts page in an IFrame
by einish
- 4 Replies
- Last post
by MS ISV Buddy Team
- I have a web solution developed in framework 1.1 and using crm 1.2
I'm migrating from crm 1.2 to crm 3.0 and I faced the following problem.
I used to display this page http://<server name>/SFA/home_accts.aspx in an IFrame in my website to display all accounts same for contacts i used http://<server name>/SFA/home_conts.aspx In CRM 3.0 I cant find the corresponding pages. o
-
- Operating on arrays? Possible?
by cfel
- 3 Replies
- Last post
by Cringing Dragon
- Hi all,
I'd like to perform some simple arithmetic on all the numeric values in a column in one workbook and copy the results into a column in another workbook. I would prefer to do this within the macro that is already running, instead of writing the formula into each cell. Currently, I am just running a FOR loop for the length of the column and performing the arithmetic and copy/paste act
-
- VBA excel outlook / A program is trying to send mail using Item.Send
by rhXX
- 7 Replies
- Last post
by LuisEG
- hi, i am trying to send an automatic mail from excel VBA to the outlook outbox, when i send the mail i obtain this security warning: A progam is trying to automatically send e-mail on your behalf. the help buttom says: A program is trying to send mail using Item.Send A program is trying to automatically send e-mail using a Microsoft Outlook Visual Basic Application command, Item.Send. If you want
-
- Adding alt text, name, and hyperlink to pasted images from another worksheet.
by jrc1378
- 5 Replies
- Last post
by Andy Pope
- I have a workbook with the following sheets:
Display (Sheet1)
Data (Sheet2)
Images (Sheet4)
My sub is built to read reference data from Data! that tells it to copy a certain picture from Images! and paste it onto Display! at a certain location. It also grabs a label name from Data! and puts it to the left of the image just pasted.
All of this works fine, but I also need
-
- WER Dialog not showing up on Vista
by Jerry Noll
- 7 Replies
- Last post
by Claus Brod
- What should a managed application do in order to have the WER Submit report dialog appear
We have a managed client application that is subscribing the App domain's UnhandledException event. When this occurs, we log the exception, stack trace, and inner exception to the Application event log. We would like to report this event to WinQual. However, we are not seeing the WER dialog appear. Do
-
- Excel Checkbox - Multiple controls-only one may have value of true
by suznal
- 10 Replies
- Last post
by suznal
- I have checkboxes on a sheet of which, the value of only one may be true at a time. (By the way, I am not allowed to use option buttons on this workbook). I have figured out the basic code to use if there are only two checkboxes involved, but each instance I have involves a minimum of three and sometimes five checkboxes.
The code I have works well (for a pair of checkboxes) provided I supply it
-
- on Microsoft Certification Program for ISV
by lityk
- 2 Replies
- Last post
by marceloshb
- We are planning to pass a veritest certifications for Microsoft Platform Test for ISV Solutions. Question is: How our managed application will be tested (AFAIK Application verifier is only for unmanaged code) Are Fundamental Requirements being checked formally or using some methodology or software. Thank You
-
- Problem with code: "Type mismatch" error
by PyroJoe84
- 2 Replies
- Last post
by ADG
- I'm writing a program to do some basic design for wood stud walls. The actual process really isn't important, but there is a part I am having problems with. The process involves many different equations and I need to end up solving for the total load, P. However, when all the equations needed are combined together (needs to be <= 1.0), 'P' occurs multiple times and is nearly immpossible to isol
-
- Aproval of responses
by Togo162166
- 4 Replies
- Last post
by Jason Hardester - MSFT
- Hello,
I registered four responses to crash events on September 26th. They're status remains "In Progress" (the tooltip says "Response is awaiting aproval") ever since. When can I expect the responses to be treated
- T
-
- Inserting a row in VBA
by KenCubs
- 8 Replies
- Last post
by KenCubs
- When I insert a row from Excel in my spreadsheet, the formulas (from the columns that have formulas) are copied from the prior row (with addresses properly changed) to the new row. When I insert an entire row from VBA, nothing is copied. Does anyone know what I need to do
Thanks,
KenCubs
-
- Need help in choosing the right function
by sree
- 0 Replies
- Last post
by sree
- Hi
I have to take required data from a sheet for say BOOK1.xls in sheet 1
and paste them into SheetA in Book2.xls
There column A in SheetA contains is actually a list of 10 companies from column A in Sheet1, which has 100 companies
I would like to copy and paste as values, corresponding cells in the same rows from Sheet1 for say, column G to column Z, to Sheet A
-
- Microsoft Office 2003 "word" not working properly after copying transferring hard-drive info via DiscWizard by Seagate
by zebaztianz
- 4 Replies
- Last post
by Harpreet Singh Khandiyal
- Microsoft Office 2003 "word" not working prperly after copying transferring hard-drive info via DiscWizard by Seagate.
I got a new SATA Seagate hard-drive and used their DiscWizard program to copy/transfer all the entire "OS" files.
PROBLEM
Windows Office 2003: when opening office 11 . . . the program trys to 'install' itself again and giving the message "sour
-
- Counting words
by une
- 10 Replies
- Last post
by une
- Does there exist a predefined function that counts the number of words in a string
-
- how to get the hyperlink value from an excel sheet cell
by Awsok
- 10 Replies
- Last post
by Duane in Japan
- hi All
I have an excel sheet that have some cells with text and under the text there is a hyperlink to another files to the network driver
Does any one knows how to extact the value of the hyperlink (not the text value that how up).
I tried many variations like =CONCATENATE("link ",T(HYPERLINK(A1)))
but it didnt help !!
Thanks for participating
Aws
-
- MDE from Access 2007 doesn't work?
by Eban Tomlinson
- 0 Replies
- Last post
by Eban Tomlinson
- Hi There, I have created a small application in Access 2007, from which when I make an MDE (as the runtime for Access 2007 isn't yet available) the Access 2003 Runtime pops up an error saying that it was created in a newer version. Has anyone else experienced this Also, in an attempt to work around this, I created an MDB from 2007, which I then opened in 2003 and made an MDE which works fine, e
-
- Communicator Mobile 2005 and TLS (Using port 4443 possible?) More options
by markm75c
- 1 Replies
- Last post
by markm75c
- Confused on something with CM and CWA:
We have web access enabled/installed, it uses MTLS and certificates on port 4443 to access the site...
I'm assuming when using Communicator Mobile on Windows Mobile 2005, I specify TLS to connect remotely to the server (no vpn)..
Is there a way to specify port 4443 or is the TLS port 443 even with Web Access installed on port 4443 (IE: these are diff
-
- case insensitive VBA for excel
by Jonas.S
- 2 Replies
- Last post
by Jonas.S
- Hi all,
How can I make the below code case insensitive for the spelling of 'stat, Stat, STAT etc'.
Any ideas how to make that happend
'ActiveSheet.Select For Each ws1 In Worksheets If ws1.Name = "STAT" Then Worksheets("STAT").Select If ws1.Name = "STAT" Then GoTo Start End If Next
Thankful for help
\Jonas
-
- Target Multiple Cells
by DinnerPlates
- 2 Replies
- Last post
by DinnerPlates
- Hi
I'm new to coding macros and have had great help with this forum in the past so thought I would give it a shot with another problem I have encountered.
I have created a macro that looks like this (thanks to the help of Andy):
-
- Answer Error Report processing delay
by brokenn
- 2 Replies
- Last post
by brokenn
- Hi,
I've signed up for WER and done some of the important steps by now:
1. Obtained Verisign ID
2. Setup a proxy caching Symbol Store to hold our symbols and also cache the msdl ones.
3. Source indexing on all my binaries to automatically extract the correct source code from svn for the relevant crash dumps.
4. Mapped my products using the Product Feedback mapping tool.
-
- Using arrows to select in drop down list in access
by RhysDavies
- 4 Replies
- Last post
by RhysDavies
- Hi - anyone know how to get a drop down list combo box to allow you to select an option using the up/down arrows on the keyboard in access rather than having to click on the down arrow on the combo box in access - user wants to do it by tabbing into boxes and using the arrows to select because its quicker.
thanks,
Rhys.