-
- Custom form display
by SParker
- 1 Replies
- Last post
by SParker
- I've created a survey with a number of places where the questions branch out- when i view submitted data however, i get a number of blank fields my question is, how do i go about hiding blank/null fields in dispform.aspx on this particular one only. i'm convinced i've narrowed it down to the web part in dispform.aspx (See below). Please, if anybody answers this, be specific- my asp.net abilities a
-
- Add web part in Discussion Board Template
by ved_30
- 1 Replies
- Last post
by Becky Isserman
- Hi,
I am using MOSS 2007.I want to add my web part in AllItems.aspx(For Discussion board) whenever a new discussion board is created.How this can be done Please help.
Thanks,
Ved
-
- How to run a MOSS workflow in my code?
by wingfeng
- 1 Replies
- Last post
by Kenneth.jing
- I have read the SDK Document.It say that:
Use the SPWorkflowManager object to:
Start, run, or cancel workflows.
Return all the workflows currently running on a specific item.
Perform other workflow administration operations.
I know how to start a workflow with SPWorkflowManager.But how can I run the workflow
use the SPWorkflowManager.ModifyWorkflow method
Shou
-
- MOSS VHD - problems with virtual server
by tcakira
- 5 Replies
- Last post
by Msanna
- I downloaded the MOSS VHD but I can't install it on the virtual server. I am getting the following error message: "The virtual machine could not be added. The virtual machine configuration could not be added. A configuration with this name already exists." The problem is, I can't see it. The link "master status" is not delivering an option for the installed virtual machine. Vi
-
- SharePoint Services Service Pack 3 errors HELP
by toddi
- 14 Replies
- Last post
by toddi
- We unfortunately were not paying attention and the SharePoint Services Service Pack 3 was installed automatically Wednesday morning the 19th. We do not have an image of server to roll back to and the SP cannot be uninstalled.
Does anyone have a solution to these problems:
1 - When users access our Intranet via SSL externally and attempt to look at a page with a Custom Data View of a list
-
- Extending Web Apps/Sites...what are the URL requirements?
by SharePointKoolAid
- 1 Replies
- Last post
by MarkGro
- I thought I understood this, but now realize I don't. ;o) We presently have 4 MOSS servers: 1 FE inside our firewall 2 FE outside our firewall load balanced with NetScaler hardware 1 App/Search outside our firewall I've built a test portal/webapp on the inside MOSS server. I now want to extend the site to the outside servers on the farm. What do I need in terms of URL's set up I assume I need one
-
- Search Web Service : The search request was unable to connect to the Search Service
by ved_30
- 7 Replies
- Last post
by Gopi Ega
- Hi, Following is my code for seraching using spsearch.asmx. string keywordString = "Microsoft"; //The XML string containing the query request information //for the Web service string queryXMLString = "<QueryPacket xmlns='urn:Microsoft.Search.Query'>"+ "<Query><SupportedFormats><Format revision='1'>"+ "urn:Microsoft.Search.Response.Document
-
- [MOSS 2007] Moving content from web application to web application
by Kasper T
- 1 Replies
- Last post
by Scott Phelan
- Hi,
I have an old web application on a MOSS 2007 Server... Now i want to make a new application but i need the content from the old one moved to the new one.
How do i move the content
Best Regards
Kasper T.
-
- Is there a Tabs control in WSS 3.0/MOSS?
by anderskj1
- 0 Replies
- Last post
by anderskj1
- Hi
I am looking af the posibilities to add Tabs to my Sharepoint solution. I¡¯m looking for two kinds of tabs (which might be the same control if it exist )
1) A Tab control like the one i Meeting Rooms where you can add the pages like Default1.aspx, Default2.aspx etc. and map a Tab to each page. Is this a standard control I could activate on eg. a STS (Team Site )
2) A Tab con
-
- Single sign on
by TicArch
- 0 Replies
- Last post
by TicArch
- I have a Web application "A" with it own user cretendials systems(database based user storage).
I am developing Sharepoint application "B" with user credential system been based on Active directory.
Now i need to provide a link of application A in B and vice versa, and user should pass on from one application to another without any prompt for username/password.
Please
-
- Customizing Templates
by Reed987
- 2 Replies
- Last post
by Reed987
- I currently have modified a team page to display certain web parts and fields in a format that we would like to apply for many different pages. Is there a way to save my design as a new theme so that I can simply select it from the theme list when creating a new page instead of needing to add and modify all of the web parts for each new page I could do this, but it would end up being very time co
-
- Inside __designer:bind
by Ludovic Chungue
- 1 Replies
- Last post
by lchungue
- Hi all ! Does anyone know what does __designer contain especially its bind "method" For information I'm talking about the xmlns esigner="http://schemas.microsoft./webparts/v2/dataview/designer" Thanks !
-
- Creating new document in forms library
by Tony Abraham
- 3 Replies
- Last post
by Tony Abraham
- Hi all,
I have a Forms library setup in MOSS 2007. I have associated a template using an infopath file. Is it possible to create a new file, based on the associated template, through code(to achieve the same action as going to the form library and selecting new document) I have configured the document to open in browser in the Sharepoint. In a web application, I am trying to redirect the user t
-
- Cannot connect to the LOB System
by translator
- 5 Replies
- Last post
by Morrido
- Hi all,
I have written a small BDC webpart that is being used to capture input from an user and add the data to a database. When I try to add the data I get the following error.
Cannot connect to the LOB System. (Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.) Stack Trace: at Microsoft.Office.Server.ApplicationRegistry.SystemSpecific.Db.DbConnectionManager.Execute(Object[] arg
-
- Alerts blank
by Alana
- 2 Replies
- Last post
by Alana
- Hi,
When I set alerts and they are sent through to my Outlook inbox the subject is shown but there is nothing in the bulk of the email. It is completely blank.
If I try to open the email I get the message 'Cannot open this item'
Every user has the same problem.
Thanks.
-
- ObjectDataSource in a web part?
by RayCan
- 8 Replies
- Last post
by RayCan
- Hello All,
My code below works perfectly when I put it in an ASP.NET application (default.aspx code behind for example), but as soon as I put it in a web part (compile it into an assembly and place it into GAC) I get this error:
"The type specified in the TypeName property of ObjectDataSource"
ObjectDataSource objDataSrc = new ObjectDataSource ( "Fully qualified name of
-
- Can not get UDF to work with COM Addin
by galexyu
- 6 Replies
- Last post
by galexyu
- Hi,
I've created simple UDF following the post:
http://blogs.msdn.com/cumgranosalis/archive/2006/08/03/ServerClientUDFsCompat1.aspx
and I've got my UDF working on SharePoint. I can open workbook in a web browser, change parameters, recalculate and it works fine.
Then I¡¯ve decided to add COM part and implement IDTExtensibility2 interface, following the post:
http://blogs.msdn.
-
- Permissions after mcms migration
by Anonymous123321q
- 1 Replies
- Last post
by Anonymous123321q
- Hi,
After a migration from content managment server 2002 to sharepoint 2007 I added a user to the visitors group of the migrated site but this user receives an access denied error when accessing the site, this doesn't happen with a new publishing site.
Only users with designer permissions or above can access the site.
Can somebody help me with this
-
- Retrieve User Permissions
by jmnxxx
- 4 Replies
- Last post
by Chase M
- Is there a way that I can get all the permissions associated with the current user SPUser doesn't seem to lead there. Thanks.
-
- InfoPath Forms and Site Collections
by Jean R St.Godard
- 8 Replies
- Last post
by Jean St.Godard
- Does anyone know why I can publish browser-enabled InfoPath forms to a site collection ( http://main/sites/test ) but I can't publish them to the main site collection ( http://main ). I have checked all the settings and everything seems to be the same.
-
- Sharepoint Designer + Expression - Frontpage = ?
by ppothier2007
- 11 Replies
- Last post
by JBBizzell
- I just downloaded the Frontpage replacement which consists of two products named Microsoft Sharepoint Designer and Microsoft Expression. From what I can tell the two products are practically identical in functionality.
Questions:
1. What is the difference if any
2. It looks to me like I can accomplish the same things that either of these two products are capable of using Visual Studio 20
-
- Designer 2007 Killed my Site
by LucidDALTON
- 1 Replies
- Last post
by The Mossman
- A couple of weeks ago, I donwloaded the Designer trial version and installed it on my Sharepoint 2007 server. I opened my site and then opened the default.master page. I made no changes and just closed the tool.
When I went in to IE to open my Sharepoint portal, all pages gave me hideous sharepoint ERROR page with no explanation. I had nothing. Luckily, we were still in sandbox mode so it d
-
- Sharepoint: Flash only shows on the default page after embedding flash into Master Page...
by TMOUA
- 1 Replies
- Last post
by Monjo
- I was able to embed Flash into my Sharepoint Site replacing the SiteLogoImage using the following code in the Master Page:
<object classid="clsid 27cdb6e-ae6d-11cf-96b8-444553540000" codebase=" http://download.macromedia.com/pub/shockwave/ cabs/flash/swflash.cab#version=6,0,40,0" width="425" height="105" id="mymoviename"> <param na
-
- Sharepoint question
by MikeyB11
- 1 Replies
- Last post
by Nicola Young
- How can I download an excel graph onto my Sharepoint homepage without having to open an attachment
-
- Uploading Pages to Publishing Site Pages Library
by braganza
- 6 Replies
- Last post
by braganza
- Does any know how to upload documents to publishing sites and then change the page layout of the page
Here is what I did:
From Publishing Site Link -> Select Actions -> All Site Content
When I select the page that was uploaded into the page library, I only see the content of my page. I do not get any of the publishing toolbars, etc. Also, I noticed that the PageLayout field