Visual Studio

Page 632




  • Topics
    Replies
    Last post
  • Visual Studio project file formats
    by Jim Robinson566365
    1 Replies
    Last post by Richard Berg MSFT
      • I'm using Intel Visual Fortran integrated into Visual Studio 2005 and Sourcesafe. Often when I save the project file the option lines in the project file change order. This is very annoying as it makes it difficult to compare different versions of the file in sourcesafe. Is there anyway to stop this happening Thanks for any help.
  • Why should I go for VSTS?
    by Sudheer Uppada
    2 Replies
    Last post by Subodh Sohoni
      • Why should I go for VSTS Can I get Clear explanation the reasons to Choose VSTS like what the failures before this approaches in Project Development, Process Whats the reason to go for VSTS What areas VSTS concentrated in Project Development What advantages of Using VSTS and get the Bussiness Solutions
  • Files clobbered when merging between branches
    by Eddie Garcia
    9 Replies
    Last post by Eddie Garcia
      • Ok, I am seeing a problem that is a bit disconcerting. This is the second time it has happened and it is more than one file. The first time I chalked it up to human error but this time I was very, very careful with what I was doing. Our branching structure is as follows: TKSMain |__TKS-Dev |__LogPAK |__SMTMessage |__VuPAK We have been integrating enhanceme
  • Slow start of debugging Managed C++ programs in VC2003
    by horeaper
    6 Replies
    Last post by rcen
      • The problem is when I start the debugger, it will load a lot of dlls (but the output window tells me there is no symbol loaded) make the starting phase deadly slow. But if I run the program without the debugger (ouside the VC IDE or press Ctrl+F5), it starts very fast. How can I make the debugger start faster Note: If I'm just debugging native programs (that is, without the /clr), the speed
  • Q: WebTest
    by ogiepogi
    6 Replies
    Last post by Yutong MSFT
      • hi, is there a way to create webtest thru the web application that i will create e.g, i create a web app that will retrieve the URL,parameters and values in the database then execute them for webtest, then get the results to display it in graph or whatsoever. Thanks
  • Copy files upon successful build
    by LasseJ
    5 Replies
    Last post by Michael Ruminer
      • Hello I've set up a working Team Build now, and I've modified the TeamBuild.proj file to copy some files when the Compile is complete. I'm using the target AfterCompile for that, but now comes the tricky part, I don't want to copy the files if there was any compilation errors. How do I achive this. Thanks Lasse
  • Installing VS 2003/VS 2005 Problem
    by Tallman
    0 Replies
    Last post by Tallman
      • Hi All, I used to have VS2005 installed on my machine but needed to install VS2003 afterwards. So did it and everything's a mess. As a result, I uninstalled everything and started back from installing VS2003 fist ,and the problem comes. Now, I couldn't debug my ASP module whilst debuggin mode in other VS modules seems fine. I got an error message like this: Error while trying t
  • "Create Unit test..." wizard from unmanaged C++ code
    by LucasC
    4 Replies
    Last post by David Gorena Elizondo - MSFT
      • Hi, Is it possible to use the Unit test creation Wizard (context menu "Create Unit test...") from unmanaged C++ code The first time I try to use it the option was available on the context menu, but after trying to use it nothing happens (the form that asks about which methods to test doesn't appear) and the option in context menu go away. If this option is not available, h
  • ONLINE MSDN FOR VISUAL EXPRESS 2005
    by jnstaub
    2 Replies
    Last post by Paul ORear MSFT
      • I restart to use Visual web dev after winter hollidays and i loose all the online help msdn but all the others communoty sites too, i receive a message : move to "exercices2.msdn.microsoft/searc/service.asmx"!!! how to change the setttings in microsoft document explorer thanks
  • TF60008: VSS database version older than 6.0? Worked before on same database?
    by WXS123
    14 Replies
    Last post by sid_worldwide
      • About 7 months ago I originally converted one project out of our VSS database to TFS successfully using vss converter. Now I find when I try to run the tool I get the following: TF60008: The VSS database version is older than 6.0. The VSS converter only sup ports database versions 6.0 or above. Please upgrade the database version and tr y again. I don't know what VSS database vers
  • Printing from a CHM produced with Sandcastle
    by Noral
    6 Replies
    Last post by Noral
      • Hi everyone, I am having a problem printing "selected heading and all subtopics" in a Sandcastle produced CHM. Does anyone else have this problem. To reproduce: Open Sandcastle produced CHM Click on one content "books" Click Print or right click and select print Select "Print the selected heading and all subtopics" Click
  • Programatically moving Projects within a Solution
    by Dave580275
    1 Replies
    Last post by vga
      • Currently in my GAT Guidance Package, I have a solution template that includes several projects. Currently, the projects all unfold into project folders at the root of the soution folder, and appear under the root of the solution file in the VS solution explorer: ..\SolutionFolder\MySolution.sln ..\SolutionFolder\Project1\Project1.csproj ..\SolutionFolder\Project2\Project2.csproj
  • Please Insert Disk 2- during DVD installation
    by gdanielg
    3 Replies
    Last post by McROBBHOOD
      • This error happens even with a minimal feature selection. The whole Message: "Please insert the disk : Visual Studio 2005 Beta: English Disk2 " File being installed : Microsoft.VisualStudio.Shell.Interop.dll The last lines from log file : >>>> START VSMsiLog0870.txt MSI (s) (D8:DC) [10:17:34:006]: Executing op: SetSourceFolder(Folder=1\PFiles\CFiles\MSShared\MSEnv\PubAssy\|Pr
  • Sandcastle: Localization
    by Dave Sexton
    11 Replies
    Last post by Dave Sexton
      • Hi, As of the June 2007 CTP, where are all of the places that a localization option must be explicitly set in order to produce completely localized .chm and .HxS files Here's the information that I have so far: Replace XML document(s) with localized content in the Content folder of the chosen Sandcastle presentation; e.g., Prototype , vs2005 or Hana . Replace XML docum
  • How to reset-clear the crviewer.
    by Can-Ann
    2 Replies
    Last post by mewdied
      • I have a form with a CRviewer. The form allows the end user to select a date range, then shows the report. I have a reset button that allows the user to reselect the date range and print the report again. My question is How to clear the crviewer when the reset button is clicked
  • printing options
    by linx
    2 Replies
    Last post by captJackSparrow
      • my concept is to print a 2 record in a single paper using cystal reports first if the transaction is like printing a gradeslip you only be needing half of the sheet of paper and the paper has its own label so that you can print only the record given within a transaction but how about the remaining space of the paper can i still use it for another set of transaction pls reply asap.. grace
  • Adding a custom Build Solution to Visual Studio 2005
    by Dancing
    1 Replies
    Last post by Craig Skibo - MSFT
      • How do you redirect the output of a script or execuatable to send text to the IDE Output window The propblem I have is that my company uses a custom build environment. I have successfully added script commands for building, rebuilding, and cleaning projects using the makefile properties, but the default behaviour of Build Solution is to simply execute Build Project for every project (all of
  • tf destroy syntax tfs 2008?
    by Teddy Kusnadi
    8 Replies
    Last post by skmcfadden
      • what's the proper syntax for tf destroy We're getting error " Item does not exist on the server " while using this command. Could you please gave some example Thanks Teddy
  • Transforming templates on a build server
    by emgee
    2 Replies
    Last post by emgee
      • Hi, I want to integrate our DSLs into our build process. We do not check in generated source code, and I want to do a "transform all templates" on the build server. I have tried things like devenv /Command TextTransformation.TransformAllTemplates but that leaves the IDE open. does anybody know how I can do a "transform all templates" as part of a build server b
  • Visual Studio Code Analysis suggestion
    by Jason Stangroome
    3 Replies
    Last post by David M. Kean - MSFT
      • Hello, In both VS 2005 and Orcas March 2007 CTP, building a project with Code Analysis enabled will show the violation warnings in the Error List tool window. If a subsequent build is initiated but no code has changed since the last build, then Code Analysis is not performed again. This makes sense because CA can take too long on large projects. Although CA isn't run because nothing
  • Data Generator
    by Darshana Bafna
    3 Replies
    Last post by Darshana Bafna
      • Hi! I want to know how can I load data into a table using Data Generator with existing data not to be erased and when I have primary key and foreign key defined on the same column of the table. I have generated about 10000 rows for one such table and next when I tried to populate it with more 10000 records, it failed giving the error primary key violation.
  • Debugger hung for Silverlight Application
    by vbvan
    4 Replies
    Last post by vbvan
      • I installed the Silverlight extension for Orcas, and can then debug the Sivlerlight Application. But the following step will hang the debugger: Ctrl+F5 to launch the Silverlight in the browser then using F5 will hang both the browser and the Orcas.
  • Intercept project item load requests without extending the project
    by BLoggins02
    12 Replies
    Last post by Craig Skibo - MSFT
      • Hi everyone. Sorry if this is a FAQ, but I searched and couldn't find the answer. Basically, I know that Visual Studio assumes a project item (like a C# file in a project) is located in a path relative to the location of the project file. If I wanted to do something "interesting" like load the file from a database instead, what do I need to do to intercept the load message and tell Visua
  • VS.net 2003 Eval. UNINSTALL. "Setup is unable to determine a valid ordering for the installation."
    by Pierrelud
    6 Replies
    Last post by chrisk13
      • I tried uninstalling it and get a msgbox saying: "Setup is unable to determine a valid ordering of installation. See error log for further details" Where is this error log How would I uninstall I which MS can for once wake up and make something uninstall and not also fail on uninstall. A fat joke it is...
  • Is there a setting to control where new tabs open in the IDE?
    by Meir Shani
    1 Replies
    Last post by Ji Zhou ¨C MSFT
      • Hello, In VS2003 and earlier, when a new tab was opened in the IDE (file drag-and-drop, Go To Error, etc...) it would open as the last tab. This way tabs already open will remain where they are. I just converted to VS2005 and now the tab that opens is the first tab. This may be a minor thing, but it annoys me. Is there a setting that controls this, or is this behavoir chance hard-wir