-
- SOS! "the operation could not be completed" Error
by asdfsd
- 1 Replies
- Last post
by Azeem Khan - MSFT
- SOS! "the operation could not be completed" Error
I am a newbie using Microsoft.Visual.Studio.2005.Pro.English.WithSP1 to develop web services. I have used the wizard building a new Visual C++ ASP.NET Web Service Project. Firstly it runs well, but after some time (I've installed some other programs, but I don't know which cause the problem), it compiles well but could not run and debu
-
- Which PSDK Downloads,Please?
by PCIlliterate
- 1 Replies
- Last post
by April Reagan MSFT
- Hello,I've downloaded VS2005 C++ Express Edition.It mentions I should now download the PSDK. (I wish (!) to be able to develop both 32 and 64 bit applications).After validation I have a choice of 3 downloads amd 64,x64 and x86.The documentation tells me to install the x86 platform.Is this correct I run Windows XP.There is also the full SDK download available in 25MB chunks.Do I need this also It m
-
- Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine...
by xr280xr
- 2 Replies
- Last post
by xr280xr
- Hi, I'm moving a web service that generates crystal reports from one server to another and get the error posted above when trying to browse the web service. I assume this is because crystal reports is not installed. I'm posting because I do not know what to install. The other server did not have a full crystal reports installation. I think it may have installed the parts it needed because visual s
-
- postpone processing objects
by Werner Geuens
- 4 Replies
- Last post
by Gert Drapers - MSFT
- Hi,
Is it possible to postpone the processing of objects during the import of a script
I have an existing project and I need to replace several objects by importing TSQL scripts.
Between scripts the project is in an inconsistent state, so it is of no use that validation of objects starts after all but the last import.
This is important for me since validation takes about 30 minu
-
- switch between TFS and TFS proxy
by suddenelfilio
- 3 Replies
- Last post
by Richard Berg MSFT
- Hello, I'm not sure if this is the right forum. But i wonder if there is an easy way to switch between our configuration for TFS and that for TFS Proxy. We have 2 offices and I would like something that allows our developers to startup the vs.net using the correct settings taking into account the location they are. I was thinking of 2 shortcuts 1 which starts the vs.net without the proxy settings
-
- Some advice on project source structuring required
by Donal McWeeney
- 3 Replies
- Last post
by Richard Berg MSFT
- Hi,
I need some advise on how to progress with branching a project we have set up in TFS - just searching through the web the last couple of hours I've came across lots of guidance that has me confused on branching patterns etc. It would have been great to have that advice many months ago when this project was initially created. The other thing I find confusing is that there are very few practi
-
- Cannot Find References Folder in Asp.net 2.0
by Dhanabalan.R
- 2 Replies
- Last post
by sekhar.j.v
- Hi all,
I'm new bie to Asp.net 2.0. In VS 1.1 there is an folder references in the solution explorer. In that we can add and remove the references what we need. But in VS 2.0 i couldn't that references folder especially for web projects. Where can i find them and how to remove them, if i dont need.
Awaiting for your reply.....
-
- One TFS project vs. Many TFS projects
by Brandon Mc
- 2 Replies
- Last post
by Hua Chen - MSFT
- We are running the trial verision of TFS 2005.
We run a website that has many different applications that runs for each drop down menu selection. So each drop down on the menu selection opens up a different web application. Currently for TFS testing I am creating a new TFS project for each application. Assigning developers and business analysts for each project has turned into assigning gr
-
- Assigning WorkItem to Group, not AD, not a person
by Edith Russo
- 4 Replies
- Last post
by Edith Russo
- I've seen several threads that address this, but I can seem to get it to work.
When a new requirement or bug comes in, we'd like to assign to a "thing" called Dispatch.
I thought I've seen snippets where you add a list item of "Dispatch" to the Assigned To field. That works fine, it does display in the dropdown. But when you attempt to save, it says that there's
-
- Lazy question re associated changesets
by Leon Mayne
- 5 Replies
- Last post
by Buck Hodges
- I know I could try this out, but it would take a while to log the work items and run the builds!
Could someone explain what happens when the value of <UpdateAssociatedWorkItems> changes The thing is, we will be running nightly builds and hourly semi-continuous integration builds which I would like the build results to show associated changesets since the last time the build type ran, but
-
- DataDude Worning
by husseiny
- 1 Replies
- Last post
by Gert Drapers - MSFT
- Hi all,
i get the following warning whene i use the built in Stored Procedure [sp_executesql].
here is my code:
Set @parameters = N '@TO nvarchar(64) OUTPUT, @TId uniqueidentifier'
Set @Select = N 'Select @TO = Username From ' + quotename (@tableName)+ ' where Id = @TId'
EXEC [dbo].sp_executesql @Select, @parameters,@TId = @targetId,@TO = @TargetOwner OUTPUT
TSD3012: T
-
- Build failing for web-service
by Mantorok
- 2 Replies
- Last post
by Mantorok
- Hi all This is using TFS SP1. I have a solution containing 1 project, a web service. Team Build is failing to build this project, I had it set for Debug - .Net and Release - .Net, here is the log: Build started 02/04/2007 10:15:28. __________________________________________________ Project "c:\teambuilds\SCMS\SCMS.MMC.FoxProReaderService\BuildType\TFSBuild.proj" (EndToEndIteration target
-
- Underwhelmed by Sandcastle
by JocularJoe
- 14 Replies
- Last post
by Tilman3
- I've noticed that the feedback on Sandcastle has been generally positive. Maybe I'm in a minority of one, but I felt I had to get this off my chest.
<rant> Having initially dismissed the first Sandcastle release as immature, I've come back several months later to try out the December CTP.
My requirements are, I believe, simple and mainstream. I want to generate documentation for a prod
-
- VS2003 with TFS MSSCCI Provider "Item is already checked-out
by Rodrigo K F
- 1 Replies
- Last post
by Michal Malecki - MSFT
- I have a problem similar to this thread:
http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=491699&SiteID=1
----
When UserA attempts to checkout a certain file from within the VS2003IDE they get the error message:
Visual Studio Team Foundation
Item is already checked-out elsewhere: $/Advantage/dotNet/Releases/1.0/Trunk/NCMC.LOS.WinUI/NCMC.LOS.WinUI.Locking/LockInformatio
-
- Is there a conversion tool from PVCS to Team System Source Control?
by Sarah Cameron
- 3 Replies
- Last post
by Sarah Cameron
- This question has been raised before in the past in the following forum: http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=614010&SiteID=1 . In case their have been any new offerings I'm re-asking the question.
Does anyone know of a third party tool that is being planned to support conversion PVCS to TFS
Has anyone successfully performed a conversion from PVCS to TFS
Thanks in ad
-
- Incident Management with Work Items?
by dmadrian
- 5 Replies
- Last post
by dmadrian
- Our organization is in the process of beginning to use Work Items. One part of the old process we want to replace is our bug-tracking/incident management (e.g. production problems, etc...) system. It was pretty straight forward to understand how the existing work items in the Agile project template could be used to track bugs for new development or enhancements. However, we also use our existing s
-
- String format data in data generator is strangely data
by Sid.Feng
- 3 Replies
- Last post
by Gert Drapers - MSFT
- Hello.
I try to use data generator to generate testing data. But the data with String format is strangely. It is not nornal words.
What I need to do to generate data I wanted. My langeage is Traditional_Chinese.
Thanks!
-
- Property grid sortorder
by Marnix Alsemgeest
- 2 Replies
- Last post
by Marnix Alsemgeest
- Currently when designing a DSL and debugging the language, you see your properties either sorted or categorized.
Is there anyway to get the properties in unsorted order in the property grid
Regards,
Marnix
-
- Team Foundation WorkGroup Vs Team Foundation
by Raymundo Chapa94595
- 2 Replies
- Last post
by Adam Singer - MSFT
- Which are the diferences betwen Team Foundation WorkGroup and Team Foundation Server
-
- rehost profiling
by JanBaan
- 4 Replies
- Last post
by Craig Skibo - MSFT
- Profiling requires linking with Microsoft libraries. Is it possible to rehost these libraries so that we can use profiling on a target system that is not running Windows
Regards,
Jan
-
- Change Regional Setting through VB 2005
by vanvelskii
- 1 Replies
- Last post
by Yaohai Zheng
- Hello folks, How do I can change the regional setting through my application e.g. I want to change my computer's date format from 'M/d/yyyy' to 'dd/MM/yyyy' , and the decimal symbol from ',' to '.' Currently I develop using vb 2005. Thanks for the answer....
-
- compile event for VC projects
by Ionela
- 1 Replies
- Last post
by Carlos Quintero - MVP
- Hi, Is it possible to catch the compile event in VS 2005 And if yes, how can be done I need to process some data after compiling a file. I know there is the build event, but that is at the project level. Thank you, Ionela
-
- Can't compare 2 changesets using TFPT command line?
by MarceloRamos
- 3 Replies
- Last post
by Philip Kelley (MSFT)
- Hi there, I'm trying to compare 2 changesets on the Team Foundation Server using tfpt, but I'm not being very sucessfull about it. While the "compare" option on the visual studio ide works fine, the same parameters on the command line do not.
here is what i'm trying:
on TFPT:
tfpt treediff "$/MyProject/Folder;C6586" "$/MyProject/Folder;C6755" /recur
-
- newbie plz .wht if my report formula returns 0 rows?
by Jay_Vora_b4843e
- 4 Replies
- Last post
by Jay_Vora_b4843e
- hello evry1,
i wanna find a way for me ..
here it hpns that my query returns 2 or 3 rows n i got reports by reportformula..
but wht if it returns 0 rows ,,it display report format but with 0 records tht i dnt like ..
so suggest me wht i shud do if 0 recrds r thr n handling tht .visible =false or displaying msg " no records found
thx
-
- My own "Hello world" sampling profile isn't working
by Cep21
- 1 Replies
- Last post
by Ian Huff
- Windows XP, logged in as admin, Visual Studio 2005 Team suite Version 8.0.50727.42. Dual core duo. I'm more of a Java person, so I may be missing something obvious. My question is what should I do to get sampling to work I created a win32 console application that calculates Fibonacci numbers recursively, and added a profiler for it. If I set my mode to "instrumentation" and click the gr