-
- TF30059 TF53010 TF53002 TF30040 -- Previously working Dual Tier installation no longer working
by Patrick Altman
- 1 Replies
- Last post
by James Manning - MSFT
- We are have severe fatal errors with TFS when I got to work this morning, starting sometime last night. I am having no luck searching for answers to these error codes and am having a bummer of a time trying to troubleshoot. Any ideas These messages were occurring repeatedly all night long so much that it filled up more than 16 mb of event log and unfortunately, that¡¯s a rolling 16mb, so I lost sc
-
- Visual Studio 2005 doesn't break on my breakpoints
by patti_nyl
- 4 Replies
- Last post
by patti_nyl
- Hi
Visual Studio 2005 doesn't break on my breakpoints, my application is a Windows app, using .NET 2.0.
What has happend What shall I do
thanks in advance, Patrik
-
- Unable to connect to remote server
by raj2007
- 8 Replies
- Last post
by Dennis Stone - MSFT
- Every time I create a web test, then add the proxy value. THis works first time. But when I try and create a load test, using the web test , I am unfortunately getting the error message 'unable to connect to remote server'.
Any ideas why this might be the case, is there any other settings that I need to carry out.
Also is it possible to find out if the port settings are needed - beca
-
- HelpStudioLite Install Missing HelpCollection.DTD File?
by Bob Salita
- 1 Replies
- Last post
by Craig Skibo - MSFT
- When doing a Build operation (Tools->Build) in HelpStudioLite, it always errors out. I believe this is because the HelpCollection.DTD file is missing. I assume this is not a generated file and is simply missing from the SDK distribution. Below is the error message followed by the contents of the Figures.hxc file. The HelpCollection.DTD file is not on my filesystem after a Visual Studio SDK Dec
-
- what is zombie state?
by kolauy
- 4 Replies
- Last post
by kolauy
- In a custom wizard, when I take:
var oPI = oPIs.AddFromTemplate("c:\\src.h"); // oPIs is a ProjectItems object
var oFCM = oPI.FileCodeModel;
var oCEs = oFCM.CodeElements;
var oCE = oCEs.Item(0); // error: the file is in zombie state.
what is zombie state How to avoid the error
Anybody can help me Thanks!
-
- Debug problem in Visual Studio 2003
by adb96hxo
- 1 Replies
- Last post
by Azeem Khan - MSFT
- Hi,
I have both VS Framework 1.1 and 2.0 installd in my computer. The solution which I got from Source safe using 1.1.
It's ok to compile the entire solution but when It didn't hit my breakpoint on some of files. The breakpoints hits other files but no a files which is kind of class library.
Have tried to clear bin katalog, all pdb, dll files in that project and set true for d
-
- EnvDTE::Project::get_CodeModel fails if solution is read-only
by Adam Gross
- 1 Replies
- Last post
by Adam Gross
- Anyone know why EnvDTE::Project::get_CodeModel fails if the solution has been opened as read-only because it is already in use Is there any good way to get around this
-
- Scheduled Build debugging
by dzimmy
- 9 Replies
- Last post
by Tom McAnnally
- In my C:/windows/SchedLgU.Txt file I get the following error when tyring to run a build through a scheduled service:
Finished 11/28/2006 11:38:27 AM
Result: The task completed with an exit code of (64).
Nowhere can I find documentation on what that code means. The msdn article: http://msdn2.microsoft.com/en-US/library/aa337645(VS.80).aspx says to check the log file or event viewer for mo
-
- Visual C++
by t_h_outdoors
- 1 Replies
- Last post
by Hua Chen - MSFT
- Whats the difference between Visual C++ 2005 and Visual C++ 6.0 How do I get Visual C++ 6.0
-
- No Debugging information for 'EXCEL.EXE' cannot be found or does not match.
by CxConrad
- 2 Replies
- Last post
by CxConrad
- Hi,
I recently installed Visual Studio 2005 Team Edition (in addition to having VS2003 installed). I have a C# 2003-based project that was successfully converted to a 2005-based project. I am receiving the following dialog when running the debugger (Excel.exe in the office11 subdirectory).
"Debugging information for 'EXCEL.EXE' cannot be found or does not match. No Symbols loade
-
- Unspecified Error since installing VS 2005 SP1
by JohnArb
- 8 Replies
- Last post
by texasdeck
- Since installing VS 2005 SP1 my Pending Checkins view never shows anything even while Solution Explorer is indicating some files checked out to me.
When attempting to use the Check In button in the Pending Checkins window and when right clicking the Solution file in Solution Explorer and selecting "Checkin . . ." I get the following error popup in a dialog:
------------------------
-
- Team Foundation Server and Project Pro 2003
by JDCAMP
- 1 Replies
- Last post
by Mareen Philip
- Situation is this, I can Get Work Items from the TFS, but when I try to publish any Task I get an error. I already posted on http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=811490&SiteID=1
They determined it was a Project problem and that a reinstall of Project would be the fix. Needless to say after a reinstall everything is the same as it was.
Could someone point me in the right
-
- Listing area permissions programmatically
by thys
- 1 Replies
- Last post
by Adam Singer - MSFT
- I am trying to build a tool that will list the permissions on area level within a given project.Now, I found a sample on James Manning's blog that I can use to list the permissions on the project level:
Code Snippet
string objectId = PermissionNamespaces.Project + projectInfo.Uri;
AccessControlEntry[] aces = auth.ReadAccessControlList(objectId); But how do I do tha
-
- CTP 7 on Team Suite, Schema Import - "statements were not fully understood"
by Datahook1
- 9 Replies
- Last post
by Jonathan Rajotte
- There are numerous statements like this:
ALTER TABLE [dbo].[DCJStatTx] NOCHECK CONSTRAINT [FK_DCJStatTx_DepartmentDeptSchedule] GO ALTER TABLE [dbo].[DCJStatTx] NOCHECK CONSTRAINT [FK_DCJStatTx_EmployeeEmployee] GO ALTER TABLE [dbo].[DCJStatTx] NOCHECK CONSTRAINT [FK_DCJStatTx_JobOpenJob] GO ALTER TABLE [dbo].[DCJStatTx] NOCHECK CONSTRAINT [FK_DCJStatTx_JobStatusStatusCode] GO ALTER TABLE [dbo]
-
- Only First 5 runs of Web Test Work!!!
by Niraj Bhatt
- 7 Replies
- Last post
by Anonymous
- Hi,
We are facing a strange problem. We have a web test recorded which uses MS-Excel 2007 as its data source to pass in few form post parameters. The recorded test does a simple transaction of deleting a record. When we run the test everything works fine. But as I increase the Web Test Runs to more than 5, only first five records are deleted in data base though all the Web Test Runs are
-
- VS2003 and TFS
by sqlster
- 1 Replies
- Last post
by Richard Berg MSFT
- I have a very big visual studio 2003 solution file including many c# and web projects. This solution file connect to TFS to load all the projects. Once I load all the projects, I build the solution file using menu navigation in ide.
How would I do this from command line Right now I have tried the following but I am not getting the full build and I don't get any error messages
devenv /rebuild
-
- Unable to debug web application remotely using VS2005 debugger
by pblecha
- 7 Replies
- Last post
by pblecha
- Hello,
I have been trying for two weeks now to find an answer to this problem. I have a web application that was built in ASP.NET 1.1. I migrated the project to the .NET 2.0 Framework using Visual Studio 2005, by opening the project and converting it using the Conversion Wizard. When I debug the application locally, it works just fine. I deployed the application using the Copy Web Site option.
-
- TFS trial edition installation sucks
by ka3751
- 1 Replies
- Last post
by Martin Woodward
- I've spent 16 hours now trying to install the TFS trial edition on a VHD of Windows 2003. And still can't get it to work (error 32000, stsadm.exe returns an error). If Microsoft really wanted individual developers to have access to new software they would distribute ready to use VHD images. I'm not a Network Engineer, don't have a WS2003 based network with a domain controller, active directory, et
-
- New Home for AssemblyInfoTask
by jamil
- 1 Replies
- Last post
by Jason Pricket - MSFT
- Since the gotdotnet site is being phased out in June, does anyone know where the AssemblyInfoTask will be hosted going forward
Thanks in advance.
-
- How do I instrument single method or part of dll???
by Hannes Larsson - 471
- 1 Replies
- Last post
by Dave Lubash - MSFT
- Hi! I have been looking for a how-to on instrumentation on single method or part of an dll or projekt with the performance tool that comes with Visual Studio Team System. Is there any how-to out there Please tell me where if any. /Hannes Larsson www.hanneslarsson.com
-
- Issues when moving transaction log files to seperate drive
by Gabriel Lozano-Moran
- 2 Replies
- Last post
by Gabriel Lozano-Moran
- This is a clean dual-server installation of TFS. I have just finished installing the databases on the data-tier and now I need to move the transaction log files to another drive. Are there any issues or gotchas I should be aware of
I also find it strange that the log files where created in the same folder as the database files because I have specified different locations in the settings of
-
- Figuring out task duration
by Teradar
- 5 Replies
- Last post
by Teradar
- Hi,
Let's say that it would take a lawyer 2 hours of actual work to review a contract. However, he tells me that it will take him one week to get it back to me.
What would be the best way to enter the duration if I wanted to capture how this impacts the timeline Should I enter it as an elapsed take with 7 day duration Or, do I simply enter two hours for the duration.
Thanks
-
- DirectoyExists
by Dewald Viljoen
- 2 Replies
- Last post
by Dewald Viljoen
- I use the following code to check if a directory exsists. works fine but on one clients machine it returns False instead of true.
I have a full tust click once application. Can anyone help me with this
If My .Computer.FileSystem.DirectoryExists(folderpath) = False Then
-
- TFS80070 Error
by PriyaSashidharan
- 1 Replies
- Last post
by Yogita Manghnani - MSFT
- Hi,
I am new with using Project Plan 2007 and integrating this with TFS. The process we follow is to update/create tasks in TFS,publish them to TFS,team members update these tasks and we refresh the plan back from TFS. Every time I open and click on ANY work item in my project plan, the TFS80070 error is being thrown. This happens when I collapse/expand groups, change any parameters of the work
-
- Installing GAT/GAX and factories under Windows Vista
by Tom Hollander
- 14 Replies
- Last post
by KevinDeGray
- Now that Windows Vista is here, I know a lot of people are going to want to run GAT/GAX and Software Factories on the new OS. While it is possible to run these on Vista, there are some known issues with the June 2006 CTPs of GAT/GAX, especially around installation.
In order to install GAX, GAT or any current patterns & practices Software Factories on Windows Vista, you should follow these s