Architecture

Page 114




  • Topics
    Replies
    Last post
  • How does one inform the serializer of new proxy types?
    by Martin R. Calsyn
    4 Replies
    Last post by George Chrysanthakopoulos
      • Environment: April and May 1.5 CTP (same results) Consider that you have two services called 'Hunter' and 'Hunted'. Hunter and Hunted run in separate nodes. Hunter will make associations with many instances of Hunted and those target URI's for instances of Hunted are not known at at compile time or even necesarily at runtime startup - they are discovered dynamically as 'Hunter' runs.
  • Batch Numbers?
    by Philip Luke
    2 Replies
    Last post by Philip Luke
      • Hi, we are currenlty looking to implement an e-commerce solution. We want to be able to use it to sell software licenses. We think the best way would be to set up stock items for each product and to allow 'people' to buy these licenses. We need to be able to produce a report that details this. We are thinking that something like Batch Numbers would be an option, but I cant see if CS2007 will allow
  • OwnerDrawn TreeView Control
    by SJWhiteley
    8 Replies
    Last post by Rachmaninoff
      • This is a TreeView control, started as an experiment, which inherits from the standard TreeView control in .NET 2.0. http://codegallery.gotdotnet.com/Treeview2 It's source code only, as a standard .vb file. Add it to a project, add some nodes, add an Image List and play around with it. Note that all the drawing is done in the paint event. The coloring for the highlight is fixed, but is
  • Basket.TrackingNumber
    by Paul Tew
    4 Replies
    Last post by Joseph Johnson
      • Hi I'm in the process of integrating one of our sites with a payment gateway. I've been looking into how I should deal with failed orders as the payment gateway requires a unique tracking number. Basically the question is that if I assign a tracking number of the basket, will the the IdentityCounter table be updated straight away Regards Paul
  • Multiple Codecs?
    by eric1969
    2 Replies
    Last post by eric1969
      • Will HD DVD support multiple codecs within a playlist It seems, based on what I've seen, that the media attribute list covers the whole playlist. Will having multiple codecs required multiple playlists Thanks Eric
  • WCF Service Publishing - Metadata
    by Ben - ECM
    2 Replies
    Last post by BenECM
      • Hi, I've been trough the steps to publish the metadata for a Receive Location with transport type WCF-Net Tcp. The web method is defined as One-way and has a small schema defined for the Request (Input) message as below: Code Snippet < xml version="1.0" encoding="utf-16" > <xs:schema xmlns:b=" http://schemas.microsoft
  • 2007 Feels Like Heaven
    by daffodilhunter
    14 Replies
    Last post by AndrewVos
      • 2007 Feels Like Heaven. I hear the party children give this year a name you spell with Letters. "Feels Like Heaven" Well, that's also a rhyme. Teach old people to replace the # symbol with numbers. Start with making the newest most modern method 1 next= I don't know anything about code sample. That's why I'm furnishing you this free information.
  • wds 3.01 crashing when searching desktop
    by rob79
    11 Replies
    Last post by rob79
      • hi, i have installed wds 3.01 on 2 terminal servers, one install has worked fine on server 2003. the install on server 2003r2, indexes fine but when go to preform a desktop search the program crashes (i.e when clicking on green desktop button), searching the web works fine. I have uninstalled and re-installed but still the same problem. when using the live toolbar through outlook this also closes
  • subtitles SACA
    by mac j
    3 Replies
    Last post by mac j
      • hello does anybody import subpicture script in SACA i have script file(.sst) and two .png files, durning importing i get no errors, but when i try to build project i get "file not found -10005" thanks mac
  • Simple distance measurement service?
    by Sergej3000
    0 Replies
    Last post by Sergej3000
      • Hi all! The goal is to put few sample distance measurement sensors around body of irobot in simulation and use that data to navigate irobot. What is simplest directed distance measurement service that is usable in simulation and that can be easily multiplited and spread around irobot LaserRangefinder works in 180 degree, so that's too much for me, or it can give distances
  • click on go button doesn't work
    by monkeyboy123456
    1 Replies
    Last post by monkeyboy123456
      • Hi I just upgraded from 2.6.6 to 3.0.1 on windows xp sp2 and when I click on the go button, it doesnĄ¯t open the full screen search. I removed it and reverted back to 2.6.6 and now my desk bar doesnĄ¯t show up either. So I put the 3.0.1 back again and rebooted. Under desk bar, you can see the search box and go button. Searching on box works fine but clicking on magnifier or clicking on search
  • I'd like to share my application: iCalculator 2.0 for Windows
    by MisterCandle
    14 Replies
    Last post by Omar Abid
      • I'd like to invite you to download a full free version of the *iCalculator 2.0*, a two-line stand-alone expression calculator that works in both Standard and Scientific Modes. Please feel free to download it and spread the word among your colleagues: http://www.iqutools.com Regards, JC Vela iQu Tools Development Los Angeles, CA
  • associates Tags To products
    by arikve
    6 Replies
    Last post by Max Akbar - MSFT
      • Hello Does any one have a suggestion on How to create Tags in commerse server and associate them to a product The Tag need to be multiValue (each producr in a specific category can have more than one tag). The Tag also need to be multilingual Thanks Arik
  • ToXAML
    by Thiago Henrique da Silva
    1 Replies
    Last post by Mark Rideout
      • Hi, In an control we have the method "ToString()" that return the type of the control ( Rectangle, Ellipse and etc ). There is some method that return the full xaml of the control Something like "ToXAML()" Something like .InnerHTML and outerHTML in HTML DOM. tks.
  • HDi, parallels, and DVDSP 4.12
    by Ryan_Gallagher
    5 Replies
    Last post by scott bates
      • We are very interested in doing advanced HD content but can not afford the Sonic toolset. Apple recently released an update to DVDSP allowing for fully compliant standard HD content discs to be built. I searched to forum for the answer to this question, and I think it is "no" but I just wanted to make sure. Is there any way to modify the HVDVD_TS that DVDSP muxes to add advanced co
  • consequences for WPF/e when the Feb 2007 CTP will expire on June 1, 2007
    by gerard1234
    9 Replies
    Last post by WynApse
      • Hello all. What are the consequences that the Feb 2007 CTP will expire on June 1, 2007 Does there come anothet CTP or what is the meaning of this I saw this at this site ( http://www.microsoft.com/downloads/details.aspx FamilyId=E63992D3-CCF5-40B9-B98A-D16BCA57467C&displaylang=en ) "at which point when a web page that uses it is rendered, it will prompt the user to update to the
  • Extending XAML for WPF/E
    by Tim Favour
    3 Replies
    Last post by Tim Favour
      • Hi, Even if the X in XAML stands for Extensible I have understood that the XAML that WPF/E understands is not really Extensible, rather WPF/E works with a fixed schema. If this is true it means that it is not possible tag XAML-elements by adding metadata as custom attributes from your own namespace, something that is essential in making the graphics 'smart'. The consequense is that the metad
  • clear the queue?
    by Ben Axelrod &amp;#91;CoroW
    2 Replies
    Last post by Aaron Lahman - MSFT
      • Is there a way to clear the message queue on a port for example if you subscribe to a service, but can't, (or don't want to), handle every notification... then the messages will get back logged, and you will eventually be working with old data. Is there a way to clear this queue by the subscriber on a periodic basis I think an analogous question is if there is a way to access messages in a LIFO
  • Expression based export - BizTalk Adapter
    by CodeDigger
    5 Replies
    Last post by Alan F- MSFT
      • We need an expression based export of the Commerce Server Catalog for various feeds. These are from the same CS instance/web service endpoint, so I need to create different receive locations with different Expressions (the filter Products and Categories clause) - howevr they all must point to the same endpoint. BizTalk wont allow me to create more than one Receive Location which points at the s
  • On Vista CSearchManager shows exceptions for BypassList and rest of the properties
    by Anil D
    1 Replies
    Last post by Anil D
      • Hello All, I get above exception when I try to browse through ByPassList for CSearchManager. Ahead I try to access Catalog manager instance using CSearch Manager its working. But when I try to Add Scope rule it is crashing. '((SearchAPILib.CSearchManagerClass)(cManager)).BypassList' threw an exception of type 'System.UnauthorizedAccessException' The application is working
  • .net Components with Ent Lib. 3.1
    by Jordi Vila
    4 Replies
    Last post by Ollie Riches
      • When I first begin migrating an existing classic ASP to .net I thought it would be great to use .Net components. This way the existing application keeps on-line and meanwhile we could start adding .NET functionalities instead of coding the whole application from scratch. I begin coding my first .net comnent and was quite easy and usefull for us to call it from classic ASP. Then I add enterprise l
  • How to select and mix subaudio tracks?
    by ds.
    5 Replies
    Last post by Peter Torr - MSFT
      • Hi there! i just trying to to show PIP with a mixed subaudio into the main audio. The subvideo ist showing, but the current audio is still the mainvideo audio. If i try Player.audio.sub.setMixing( 128, //ltoL 128, //ltoR 128, //ltoC 128, //ltoLs 128, //ltoRs 128, //ltoLb 128, //ltoRb 128, //ltoLfe
  • Inventory catalog
    by Wiggles
    2 Replies
    Last post by Max Akbar - MSFT
      • Is it only possible to to import an inventory catalog using one of the ImportXml methods of the InventoryContext Do the business applications not support this Thanks ...
  • Synchronizing Legacy DB and Application DB
    by Sergio Ordine
    8 Replies
    Last post by Riekesh
      • Hi All, We are developing a solution which requires consulting some information on legacy systems. There is also a requirement to keep the system available even if the legacy systems are out. We are thinking about replicating the information on our application DB as a contingency (it is acceptable if the data we have to use does not change often). My questions are: Have anyone used a
  • IMFPresentationDescriptor::Clone
    by Avhacker
    3 Replies
    Last post by Becky Weiss - MSFT
      • Hi, According to http://msdn.microsoft.com/library/default.asp url=/library/en-us/medfound/html/82db6f32-ad94-4563-b8bd-8a5072c5b221.asp , "To create the copy, call IMFPresentationDescriptor::Clone". Could anyone tell me why we need to call the member function Clone instead of AddRef