-
- VSTO 2005 Popwerpoint Add in deployment issue
by Andy_T1
- 1 Replies
- Last post
by Ji Zhou 每 MSFT
- I created, a powerpoint add in project that does some manipulation using PPT object model. As part of the installer, VSTO 2005 runtime was installed, and trust granted to assemblies. However, when I run my add-in, the following error happens - it does not occur in development environment: System.MissingMethodException: Method not foud: 'Microsoft.Office.Interop.PowerPoint.Shape Microsoft.Office.In
-
- Error while trying to run project: unable to start debugging
by Dotnet007
- 7 Replies
- Last post
by Ying06
- Hello all,
i'm currently working on an add-in for microsoft Excel and i have many problem to debug my code. I checked the 'properties - configuration debugging - start external program ' it's correctly filled with my Excel.exe path
But when i run a debug there is an error message :
Error while trying to run project: unable to start debugging Unable to start program 'C:\Program Files\
-
- usage of InlineSape.LinkFormat.AutoUpdate
by Edve
- 6 Replies
- Last post
by Edve
- Hi,
I have a question about the usage of InlineSape.LinkFormat.AutoUpdate!
In our application we add inlineshapes to a document which we later on want to update from the hard-disk with a new generated image. We explicitly tell word to save the pictures with the document ( saveWithDocument) , and also say it must link to the file. The problem is that when we re-open the document, (and
-
- Retrieve cell value
by dsMqplp
- 5 Replies
- Last post
by Jeremy McNitt
- Hello,
I would think this would be a rather easy task but it has thoroughly confused me.
I am trying to take the value in cell[1,10], which is the result of a formula, and assign it to a variable in my code. So far, I have been unable to do this. I am using Excel 2003, C#.
This is my code:
If (dbConnection.Open != null)
{
Cells[1,10] = "Success";
}
//Below is
-
- How can I get the right-click menu in the outlook07?
by Peter.Zhao
- 4 Replies
- Last post
by Peter.Zhao
- Hi!
I want to replace the right-click menu(or append some menus to it) in the outlook07. In the outlook03 html editor, I can get the right-click menu by using name "Context Menu", in the Word some names can be used: "Table Text ", "Text" .etc
But I don't know the name of the right-click menu in the outlook07, at the same time the outlook07 launch a
-
- How to avoid the problem of table getting created with in another table
by MrudulaYamini
- 1 Replies
- Last post
by Cindy Meister
- Hi Guys,
I*m facing a
problem when I*m trying to create multiple tables using office tools(Word) in .net.
The first page is getting displayed pretty fine, but in the next page the table
is getting displayed in an other table there by distorting rest of the pages. I
will be thankful if any one can help me out of this. If the problem is with
going for next line after the table , why is
-
- WindowActivate not being called
by JenniferStites
- 5 Replies
- Last post
by Ji Zhou 每 MSFT
- My code adds a custom menu to Word documents in the WindowActivate method. My problem is that when a Word document is opened through Internet Explorer, the WindowActivate command is not called. Does anyone know what command is available for when a Word document is activated after opening it through IE I have found this documentation so far but nothing to resolve it...
-------------------------
-
- Can't get my addin into Word
by Freeko
- 2 Replies
- Last post
by Freeko
- Hi guys, I'm having terrible problems with word add-in and I need some assistance :) I wrote simple Word add-in as in "VSTO using C#.." book and it compiles ok, even setup compiles (and "installs" if I try to install it), but- no matter if I only debug it thru word or try to import it into word (com add-ins) it won't go. When I compile my project, I get DLL file. if I try to i
-
- new to visto.. please help
by krishna kumar
- 1 Replies
- Last post
by Dennis Wallentin
- Hi all,
I am new to VISTO and really appreciate if some one could help on the following issues.
I am working a Excel appliaction that uses a c# dll to get data from a java server using http client. I've used a VBA addin ( xla file) for menus and some basic operations. After the user sing on , I create a object as,
Set mobj = CreateObject("MyDLL.ClassName")
and sta
-
- How to add a speaker notes programmatically to a PPT slide?
by Langars
- 2 Replies
- Last post
by Langars
- Hello,
We are developing a powerpoint automation application using c#. can i know how to add a speaker notes programmatically to a slide Thanks,
Thanks,
R. Sankar
-
- Simple find and replace in MS Word is not working, new to vsto
by eanda9000
- 6 Replies
- Last post
by Cindy Meister
- Hi,
I am very new to vsto, less then one day. Basically all I need to do is find and replace text in the word document. While my code compiles, nothing is getting replaced The select works but the Replaces execute but noting appears to happen.
Please let me know if you have any ideas as to what the issue could be.
Thanks!
Protected Sub btnWordSR_Cli
-
- Excel Worksheet Truncation
by AHSVGUY
- 5 Replies
- Last post
by Cindy Meister
- I have searched and searched and searched about truncation of a large Excel Worksheet when inserted in to an application with "Insert Object". I found a technote, but it appears that the original problem has been resolved. However, I can't seem to make it work in my application nor a simple MFC application created with VisStudio 2005. I have also worked with Excel 2003 and 2007.
I tak
-
- Excel2003 Addin
by Binod Singh
- 6 Replies
- Last post
by Ji Zhou 每 MSFT
- Hi
I have created a new menu item in Excel Menu bar using VSTO 2005 SE (C#). This menu is working perfectly however I want to assign some short-cut key to this menu say {ctrl + K}.
Can anyone tell me How to do this
Thanks in Advance Binod
-
- Outlook Automation
by Kulvinder
- 13 Replies
- Last post
by Ji Zhou 每 MSFT
- Hi, I want to know that if i create an Outlook Addin, how do i make sure that it is loaded eveytime i open Outlook Lets assume that i have PIAs and eveything required installed. The problem occurs when the Outlook object is opened by an Outlook Automation e.g. Active Sync. In that case, no toolbar is loaded. Is there any way i can make sure that my toolbar is always there
Regards
Kulvi
-
- document close event.
by mcnamaragio
- 7 Replies
- Last post
by Cindy Meister
- Hello, I want to use the close event of document object but the thing is that it is still fired even when the user clicks on the close button but then chooses cancel when the prompt is displayed. The microsoft.office.tools.document class has shutdown event that I'd like to use but it is not possible to use this class from another application. What can I do should I create a component using VSTO an
-
- Outlook 2000 - Running a local application from an email link.
by michael447887
- 1 Replies
- Last post
by Sue Mosher - Outlook MVP
- I am trying to get Outlook 2000 to run a locally installed application by clicking a link in an email, however I cannot get it to work on Outlook 2000, only 2003. Here is the link I am using:
Code Snippet
Click <a href='"C:\Program Files\Mfgr\Program\Program.exe" CmdArg'>here</a> to launch the application
Does anyone know what security settings n
-
- Predictive Text in Word 2007
by dirty-shirt
- 6 Replies
- Last post
by dirty-shirt
- Hi all, I was just wondering if it was to possible to use predictive text in Word. What I had in mind was something like in Visual Studio where it would give you a menu with the possible options.
Cheers,
Tim.
-
- Outlook form region
by emad masri
- 6 Replies
- Last post
by Mike Morton - MSFT
- Dear All,
I'm trying to create outlook form region to customise the outlook 2007 mail form - add a combo box that gets its data from sql server 2005 database - ; however I cant create even a basic form region. I searched a lot throgh the net and msdn but with no luck.
All the samples that I try seems to be old, or was created for the beta VSTO or beta Office 2007.
Kindly could you help me
-
- Activating next\previous item
by ArthurTep
- 11 Replies
- Last post
by ArthurTep
- Hello,
In my project I need to simulate in WinForms behavior one can observe in Inspectors window.
Once you open inspector on a particular item. In the top left corner of the inspector there are two arrows allowing moving the inspector the next\previous item in the folder according to the view sort.
Searching hard as I can, I haven't found anything that can give me the same func
-
- VSTO Excel very slow
by jk_uk2
- 6 Replies
- Last post
by Dennis Wallentin
- Hi,
I have an Excel add-in wrritten using VSTO SE that I'm having a bit of trouble with. I have two issues:
1)Outputting approximaltely 300 rows of data to Excel takes much longer that it would do in VBA.
2)The windows forms in the add-in are also a little slow to load.
The slow outputting of data is the main issue. I have set calculation to manual, turned off screen updati
-
- creating a custom outlook form
by cfcolumn
- 4 Replies
- Last post
by Ji Zhou 每 MSFT
- How do I configure the properties if I want to use a drop down calendar on a date/time field I stumbled upon it before but can't figure it out now.
outlook 2003
thanks for the help
chris
-
- C# UserProperties
by AndyJump
- 14 Replies
- Last post
by Sue Mosher - Outlook MVP
- This has been driving me nuts :/
I have this method (SetArchived):
Code Snippet
public static void SetArchived(MSOutlook. MailItem mailItem, bool value)
{
if (mailItem.UserProperties[ARCHIVEDPROPERTYNAME] == null )
{
mailItem.UserProperties.Add(ARCHIVEDPROPERTYNAME, MSOutlook. OlUserPropertyType .olYesNo, false , MSOutlook. OlUserPropertyType .olY
-
- can we detect header footter contains mailmerge field or not ?
by shahjapan_2005
- 2 Replies
- Last post
by shahjapan_2005
- I am using MailMerge for custom data using C# Word Interop Assembly. Word doesnt allow Merge field in Header Footer, so is there any way that we can detect that Word Contains MailMerge field in header or footer. Regards, Japan Shah
-
- Accessing other users' Inbox folder programmatically
by firebasket
- 5 Replies
- Last post
by Sue Mosher - Outlook MVP
- I would like to know how to access other users' Inbox folder in VB.NET if I have the permission to access the user's Inbox folder through Outlook 2000. Thanks in advance.
-
- Multithreading in VBA for Excel
by MLange2064
- 12 Replies
- Last post
by ScorpDaddy
- How do you Multithread in VBA for Excel I know how to do it in Visual Basic Studio but I cant get it to work for Excel Is there a certain reference I need There is very limited information on the web about multithreading in Excel. The web also says Excel Visual Basic 6.3 has multithreading capabilities. Thanks If anyone has a simple example, such as two drawings moving simultaneo