Software Development for Windows Vista

Page 505




  • Topics
    Replies
    Last post
  • ActiveX Installer Service does not work
    by Zsolt Soczo
    6 Replies
    Last post by HURR
      • I've created an ATL COM component, packaged to a CAB, the signing certificate is marked as trusted. I can successfully install the component, obviously through the UAC elevation dialog. But nonadmins need to install this component. So, I've installed the ActiveX Installer Service on a standalone machine, not in a domain member. The service is started. I setup the necess
  • How to bring up Infopath form on a task of the workflow
    by Ketaki
    6 Replies
    Last post by pavel_roy
      • Hi, I want to know how to show an infopath form when a task is edited in a workflow. Please let me know what steps to follow to do the same. Regards, Ketaki
  • Replicator activity inside While activity
    by kyosuke
    14 Replies
    Last post by Rajya
      • I have a replicator activity and inside it I put a code activity. There is only a single line which print out the current child data of the replicator activity. It works fine and give me the expected result, but when I put the whole stuff inside a while activity, there is an error when access the child data of replicator, saying that the replicator activity is not "Executing". Why would
  • IMAPIv2 and restricted/limited users
    by Felix Gartsman
    8 Replies
    Last post by SebMouren
      • Hello, Are there any limitations on burning cd/dvd as a limited(non-admin) user Are there any UAC issues that could affect burning Felix.
  • source filter
    by ayeesha
    2 Replies
    Last post by ayeesha
      • Hi, Can anyone guide me in getting a source filter code for reading a file
  • SelectionItemPattern for a listbox
    by Nick__A.
    3 Replies
    Last post by Karl Bridge - Microsoft
      • Hi guys, I created a small test application with a standard .NET listbox on, it contains 4 items. I implemented the 'selectedindexchanged' event so that it displays which item was selected. When I select manually, it displays the itemindex that was selected. But when I select via UISpy (SelectionItemPattern), then it selects the item, but it doesn't trigger the event So no even
  • MAPISendMail difference on vista.
    by vistacoder
    0 Replies
    Last post by vistacoder
      • On the application I'm working on, the function MAPISendMail is used to open a new mail message using the default email application (Outlook). MAPISendMail is called like: MAPSendMail(0,0,the_message, MAPI_DIALOG | MAPI_LOGON_UI, 0) Note the flags MAPI_DIALOG and MAPI_LOGON_UI With windows XP and prior, the above call returns the following values in the following cases: (a) Default email client is
  • Where is the Application database to be installed?
    by AP_ES
    14 Replies
    Last post by AP_ES
      • Hey all, According to the Windows Vista Software Logo Spec 1.0.doc ( Version 1.0.0006 ), Item 2.3 "Install to Correct Folders": Applications should be installed to Program Files or the user¡¯s AppData folder by default. For per-machine installations, user data must be written at first run and not during the install. Since the install potentially elevates to a different user
  • SendInput and Secure Desktop
    by David Weber
    9 Replies
    Last post by Sangil Seo
      • Hello, I am currently working on an application that can send mouse input to the Secure Desktop in Windows Vista Therefore I have created an application with manifest u(iaccess=true) and digital signature and copied it to \program files. Unfortunately when I now try to access the Secure Desktop with OpenInputDesktop() I receive ERROR_ACCESS_DENIED. Any clues on what I am m
  • Application setup failed under Vista. UAC problem.
    by LLIAMAH
    3 Replies
    Last post by AndyCadley
      • I work on setup for application. Our setup successfully install application under XP but under Vista it has very suspisious behavior: 1. Installation could not register 2 COM dlls, but you could skip registration and this dlls will be placed in directory. 2. Then you must to turn off UAC (User Account Control) and restart PC. 3. After 2-nd step you could open Program Files\<Application
  • Capture path sAPO problem.
    by s_deshpande
    4 Replies
    Last post by Hakon Strande - MSFT
      • I am working on a USB audio device to work on Vista. It works fine on XP and it uses its own audio algorithms in the GFX module of XP. My audio algorithms require both Render and Capture path signals as inputs. In Vista as this XP-GFX feature is no more available so i am making use of sysfx sample to tap the render and capture signals to feed my algorithm. But i am facing a problem with t
  • Compatibility of MS Visual Studio "Orcas" with MS Tablet SDK 1.7
    by dilbert2007
    2 Replies
    Last post by Mark Hopkins - MSFT
      • I have loaded in the MS visual studio "Orcas" and then tried to load in the MS tablet SDK 1.7 and can not find the ability to reference the two together. In earilier versions the referencing is done in the virtual basic add reference box, but this does not exist in the "Orcas" version. Does anyone know how to reference the two together I am a novice at this so ple
  • How do I install the WWF extension for Visual Studio?
    by Tom581157
    7 Replies
    Last post by Ansci
      • Hello, I am trying to install the WWF extensions for Visual Studio 2005. I downloaded http://www.microsoft.com/downloads/details.aspx familyid=5D61409E-1FA3-48CF-8023-E8F38E709BA6&displaylang=en However, the first message specifies this is for Vista Beta 2 (! !). Also, when I create a simple sequential workflow, the designer crashes. This indicates I may have downloaded a old version. However
  • .Net 1.1 on windows vista
    by Pranahetha
    4 Replies
    Last post by Pranahetha
      • How to make a .net 1.1 application run on windows vista When the System.Diagnostics.Process namespace is used the application throws an exception. How to overcome this It runs well when run as administrator. However, our clients will not be given admin privilages. Looks like the security system on vista has been changed a lot. When running with normal user account, how would i
  • About CSourceStream::fillbuffer
    by Burrough
    11 Replies
    Last post by Geraint Davies
      • Hi All, I am trying to stream data using the source filter derived from CSourceStream, this filter seems to be working fine in case of audio only and video only files but however when i try to stream an AV file 1.Video is not seen, only audio is heard. 2.There is no video sample occuring at the Fillbuffer i get only the audio samples. 3. Video and AUdio are out of sync. Can i get an
  • Mysterious XPS Essential installation failure
    by Michael Herman - Parallelspace
    14 Replies
    Last post by XPS_fan
      • The install runs for a long time and then when the progress bar is 80% complete, the following error message is displayed: "XPS Essentials Pack Setup Wizard" "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personell or package vendor."
  • NCRYPT_SCHANNEL_INTERFACE GetSChannelInterface
    by kollegin
    0 Replies
    Last post by kollegin
      • Where can I get documentation about this interface and SslProviderFunctionTable returned by GetSChannelInterface We are planing to realize CNG Schannel provider for Russian cryptographic algorithms.
  • Using DynamicPropertiesActivity in XAML only
    by chakravarthy_b
    4 Replies
    Last post by chakravarthy_b
      • Hi, DynamicPropertiesActivity Library privided by Ghenadie is very useful in normal workflow. http://blogs.msdn.com/ghenap/archive/2006/05/08/592236.aspx Can anyone tell me how to use this activity in XAML only workflow. -Chakri
  • Windows media formats on Vista
    by ReinerP
    1 Replies
    Last post by ReinerP
      • Hello, I want to fill a list with available Windows media audio formats. I use the following (simplified!): WMCreateProfileManager(&profManager); GetCodecFormatCount(WMMEDIATYPE_Audio, 0, &count) CComQIPtr<IWMCodecInfo2> codecInfo = profManager; codecInfo->GetCodecFormatDesc(WMMEDIATYPE_Audio, codec, i, NULL, NULL, &size) this works fine on XP, but on Vista a get a very sh
  • Takes too long to burn data to DVD
    by Bob77777
    1 Replies
    Last post by Garrett - MSFT
      • Hello. I got the new Toshiba laptop with Vista installed last weekend. It has DVD multi drive with Intel dual core 2. Last night, I tried to burn about 4GB data to DVD with my new laptop and found that it takes so looong !! First message was estimated time "1 DAY and 7 hour' and it reduced to 4 hour !! Moreover, it did not finish after 7 hours and system freezed. Is my DVD multi d
  • Adding parameter of Webservice Input Activity to a list
    by brad.p
    3 Replies
    Last post by Vignesh Kannappan
      • Good afternoon, I'm looking to use a Webservice Input Activity to add an item to a list, and I was just wondering what the preferred method of doing so might be I was going to simply create and bind to a property where the "Setter" adds the item to an existing list... but this seems a little bit like a hack. Is there a more proper way of doing this Cheers, Brad
  • Asynchroneous processing of filter messages
    by shaul_ei
    6 Replies
    Last post by Thore Karlsen
      • I need a way for my filter graph to handle asynchroneous messages sent by my home-brew filters. Currently, I use the following awkward scheme: I define my top window as the target to all graph notifications using SetNotifyWindow() When my top window's message handler detects that a message was sent by a filter (it cannot determine what it was and what were its parameters), it cal
  • "Workflow Patterns" evaluation of Windows Workflow Foundation?
    by Michael Herman - Parallelspace
    5 Replies
    Last post by Michael Herman - Parallelspace
      • Has anyone (familiar with the Workflow Patterns work of Dr. Wil van der Aalst) undertaken or is anyone considering a Workflow Patterns evaluation of Windows Workflow Foundation Please contact me. Michael Herman Parallelspace Corporation Workflow Patterns web site: http://www.workflowpatterns.com/
  • Communication with the underlying transaction manager has failed happens intermittent
    by Harald Hedlund
    14 Replies
    Last post by Bruce Brown
      • Windows XP SP2 and SQL Server 2005. I have two different servers: one running SQL Server Express and one running SQL Server Standard Edition. I have the following settings for MSDTC on all clients and servers: MSDTC on both Server and Client : a.Network DTC Access - Checked b.Allow Remote clients - checked c.Allow inbound and Allow outbound - checked d.No authentic
  • How do you add bidi extension Files to a TCP/IP port for Windows Vista
    by AndrewMorgan
    2 Replies
    Last post by AndrewMorgan
      • Hi Folks, Part of the Windows Vista Logo Program requires a printer driver to support Autoconfiguration if the printer supports installable hardware options (i.e. memory, staplers, or extra input trays). The WDK supplies documentation on various aspects of Autoconfiguration and a sample driver. However the project I'm working on is not UniDrv based and consequently there is informa