-
- digitally signed
by watch is
- 6 Replies
- Last post
by Ilya Tumanov
- I am trying to install some software I developed and it installed fine on my dell but when I try it on the HP IPAQ I get a message saying "Installation was unsuccessful. The program or setting cannot be installed b/c it is not digitally signed with a trusted certificate." I have looked somewhat into digitally signing. but it seems to cost $$$$. Is there any way to bypass this or what do
-
- Sidebar Gadget Submission Rejection - Why?
by Pixelsyndicate
- 8 Replies
- Last post
by Pixelsyndicate
- Anyone know how one would determine why a Sidebar Gadget Submission through http://gallery.live.com/ would have been rejected; or how I might know why it was rejected
I tested it fully with Vista Ultimate... I have my manifest, icons, defaults, its COOL and best of all, its one of very few IM and SPACES themed Sidebar Gadgets I have seen available.
I have posted it on my own
-
- Uninstall ActiveX based gadget
by Mark Schmidt - MSFT
- 5 Replies
- Last post
by Andy E
- Has anyone been able to successfully figure out how to uninstall a gadget that uses ActiveX/COM (C# .NET Interop in my case). I created a javascript function for onunload and set my ActiveX to null but I still receive an error when uninstalling since sidebar doesn't release the reference to my dll.
Hope someone can help. I can't upload to gallery.live.com until I figure this out.
-Ma
-
- Why does ActiveSync 4.0 Spontaneously Disconnect?
by Joseph Geretz
- 5 Replies
- Last post
by Andrea_A
- After upgrading to ActiveSync 4.0, I notice that ActiveSync spontaneously drops the connection after a couple of minutes, even though the device (Audiovox SMT5600) remains connected to the USB. I've reverted to v3.8 and this no longer happens, so this is obviously a v4.0 issue. Any ideas - Joe Geretz -
-
- Passing data between main HTML and Flyout
by haelio
- 5 Replies
- Last post
by Luis Miguel Abreu
- Hi there,
Basically my problem is that I need to pass data from the main page (docked.html/docked.js) to a function in the flyout (flyout.html/flyout.js). So when the user clicks on the image currently displayed in the docked window, the flyout opens with a larger version of this image. The code that handles the click (in docked.js) needs to pass a variable to a function in flyout.js (which wil
-
- Change gadget title and gadget width
by nguyentanbao
- 3 Replies
- Last post
by ToddOs
- Hi,
I got 2 problems with Space gadget:
- setTitleText: due to SDK, it only works with inline gadget. But when upload gadget, we are forced to set non-inline gadget. Is there any way to change the gadget title dynamically
- I view source and saw one css class: FullRegionWidth which helps the gadget to occupy the full width. How to make my gadget full width
Thanks,
Bao Nguyen
-
- PPC ROM access
by samame
- 5 Replies
- Last post
by Ilya Tumanov
- Hi, i have only one question: Is there any way to access to ppc's ROM thanks
-
- WM 5.0 SNAPI: How is PhoneSignalStrength actually derived?
by HankJ
- 3 Replies
- Last post
by HankJ
- Hello All - I am new to WM 5.0 but enjoying it. Rory's screencasts on Channel 9( http://channel9.msdn.com/Showpost.aspx postid=209784 ) have been very helpful. However, the app I am developing (an enterprise app for determining cellular coverage in a given location) seems to be limited by the SNAPI abstraction. That is, Microsoft.WindowsMobile.Status.SystemProperty.PhoneSignalStrength gives me &
-
- ProgressBar
by SOAC
- 6 Replies
- Last post
by SOAC
- may help someone,
HWND hwndPB;
HWND hwndParent;
HINSTANCE h_hinst;
hwndPB = CreateWindowEx(0 ,PROGRESS_CLASS,(LPCWSTR) NULL ,WS_CHILD | WS_VISIBLE, 10, 240, 220, 20, hwndParent,(HMENU) 0, h_hinst, NULL);
SendMessage(hwndPB,PBM_STEPIT,0,CLR_DEFAULT);
SendMessage(hwndPB,PBM_STEPIT,0,CLR_DEFAULT);
SendMessage(hwndPB,PBM_STEPIT,0,CLR_DEFAULT);
SendMessage(hwndPB,PBM_STEPIT,
-
- 2nd try: What DLL are wave routines in?
by Frank Miller
- 14 Replies
- Last post
by Ilya Tumanov
- I'm having trouble getting access to some wave routines: I have been using these routines to access sound under Windows XP using the winmm.dll DLL. I would like to know which DLL these routines are in under WM5 (if at all) [DllImport(DLL)] public static extern int waveOutGetNumDevs(); [DllImport(DLL)] public static extern int waveOutPrepareHeader(IntPtr hWaveOut, ref WaveHdr lpWaveOut
-
- Installing of .net CF and sql mobile 2005 on a new pda
by .net sukbir
- 11 Replies
- Last post
by .net sukbir
- Dear All,
I have already developed a simple database application and working well with the emulator. So my next step is that I want to move my application to my new pda. So I know it requires the .net cf framework and sql mobile 2005 for it to work. So I am now lost is that how to install both of this base software before I can deploy my application. Is there any step by step guide to he
-
- Display label over tab control
by Brazzle
- 1 Replies
- Last post
by Adamus Turner
- Hello all, I have a tab control on a c# pocket pc application. I am only using two tabs and so there is a plethora of empty space on the tab bar that I would like to utilize. I want to add a label over this space to use for program status updates; however, I cannot get a label control to appear above this area. I have tried to send the tab control to the back while bringing the label to the front,
-
- Browser Helper Object for Pocket PC 2003
by Corey_Mercer
- 1 Replies
- Last post
by Corey_Mercer
- Hi, I have been researching this now for a couple of weeks and I just keep hitting a brick wall no matter what direction I go in. I am trying to create a BHO for Pocket PC 2003. The ultimate goal is to create a full-screen kiosk-mode for Pocket IE. The IWebBrowser2 Interface is not supported for the version of Windows Mobile that I am using and upgrading is not an option. I have downloaded a share
-
- where to write keys?
by JR_runnfool
- 5 Replies
- Last post
by Andy E
- So I'm looking to store user settings like a password in a relatively secure area. I've read all of the posts about persistent settings and as far as I can tell, no one has quite tackled this one.
In another thread (somewhat unrelated), Andy E said "if you want to create persistent settings across all instances of your gadget you could read from/write to the registry"
The
-
- How to get Market information when add gadget by URL "http://www.live.com/?add=http://xxx/xxx.xml"?
by startlet
- 3 Replies
- Last post
by Rodcet
- When I add a gadget by inputing URL for example ' http://www.live.com/ add=http://xxx/xxx.xml ', I can't get the correct market information but it gives me "en-us" all the time as I set the language in live.com is Chinese which's market information is "zh-cn". So is this a bug in the live.com Or is there any other ways to get the correct market information
Ps: getLanguage()
-
- Clock Background
by Carlo Veltri
- 8 Replies
- Last post
by Carlo Veltri
- i'm trying to change the background of default clock, but the hands become pink... how can i do HELP
-
- ARMv5 instruction(DSP extension) set support in VS2005
by RamanaReddy
- 4 Replies
- Last post
by satishbabu
- Hi,
I would be happy if u can help me in this regard.
I want to make use of ARMv5 instruction set especially DSP extension set ( QADD and CLZ etc.) for my application in VS2005.
How can do that
pls see below for assemler build number. should I upgrade I have set "compiler for architecture" to ARM5T using Project | Properties | Configurations | Compiler | Advanced options.
-
- how can a thread return a true/false?
by Panos_gr
- 6 Replies
- Last post
by Ilya Tumanov
- hello all,
my question is simple! when i initialize a thread and i pass a function to it and then implement the .Start() method i want to have a way to see if the statements on that function succeded or not... in other words how can a thread return a bool to check if it completed its operation successfully or not
thanks a lot!
-
- How to develop a TabControl for SmartPhone Platform?
by x-ninja
- 6 Replies
- Last post
by Neha Goyal
- I am a rookie of Windows Mobile programming, these days, I wanna develop a TabControl for SmartPhone Platform, something looks like the UI of SkyPE(SmartPhone Edition), during the development, I encountered many problems, I just adapted my project from an example that teaches u how to paint a TabControl in PC Platform, but the adapted project can't work effectively on my device. If here is someone
-
- Bluetooth Code example on windows XP
by Sam43
- 3 Replies
- Last post
by Adam West
- Hi, I am not sure if this is right forum for asking this question. I am looking for a code example to create a communiation channel using Bluetooth on windows XP. I have searched in msdn online. It seems that there are 2 ways. The first one is using winsock and the other one is using direct Bluetooth api. However, I haven't found any code example for them. I suppose that winsock programming would
-
- .NET CF versions
by alvon
- 4 Replies
- Last post
by alvon
- hi everyone ,
wanting to ask these:
hw can u knw which version of .net CF the pocket pc is using is there a way to find out been searching through the device, but cldnt find it....n hw do i upgrade the .net CF in pocket pc n if i did, wld it effect much on the pocket existing programs
btw, im using VS2005 n my pocket pc is VM5.
any ideas
-
- Bug #32 g:background "blur" and "softEdge" problems
by Jonathan Abbott
- 0 Replies
- Last post
by Jonathan Abbott
- Bug #32 g:background "blur" and "softEdge" cause the partially
transparent background pixels to overlay the Gadget when focus is
lost. Added to the known bugs list . This one has annoyed me for around five months, trying to figure out what was causing it. Turns out it's focus - of all things! The problem even occurs if you use a blank g:background and add an image object, applying the blur/softE
-
- Problems deploying mobile app installer
by pnoyteky
- 2 Replies
- Last post
by Zero Dai - MSFT
- i have seen so many blogs and forums about mobile apps deployment. They concern mostly in deploying a single cab via ceappmgr.exe using MSI and an .ini file. My problem is i need to install the .net compact framework and sql server mobile cab files with my application. When i try to declare everything in my .ini file only my app is installed and none of the others are installed. What am i doing wr
-
- how can I debug wceload <cabfile> failure?
by Seemit
- 4 Replies
- Last post
by Seemit
- Hi,
Is there any way I can generate some error log file while executing Wceload to debug and identify what went wrong while installing the .cab file on Windows CE device
-Seemit
-
- error retrieving information from user datastore
by Nathan Franklin
- 7 Replies
- Last post
by ripern
- hello guys, i am writing a pocket pc project using vb.net 2005. just this morning i opened up my project and I got the following error.. error retrieving information from user datastore. and then "the project could not be opened because it refers to a device platform that does not exist in your datastore." I haver been unsuccessful at fixing this problem. so far I have tried deleting th