-
- HttpSendRequest can't return fail when no connection available
by Marina Ma
- 2 Replies
- Last post
by Saravanan V V
- Dear All, I' m using the HTTP APIs to connect web site in my application, and the code works almost well, but there is a strange thing: On Pocket PC, I can access net connection using ActiveSync, and in application, the HTTP connection is successful. The strange thing occurs if I do following step: - Connect PocketPC to PC using ActiveSync. - Do HTTP connection in application and success. - Remove
-
- How to prevent a mobile device from powering off?
by Wittrockvita
- 5 Replies
- Last post
by Tom v E
- Is it possible to prevent the mobile device from auto power down while my application is running
Thanks Ole
-
- PDA reboot to re-run application?!!
by MistaMega
- 2 Replies
- Last post
by MistaMega
- Hi guys,
I've encountered a little problem. I've developed a program in C# to be run on a PDA. I got it successfully setup and installed on the PDA, but when i run the program it runs once. At that point if i close the program it doesn't run again until i do a reboot (soft reset) of the PDA. Any ideas on how i can get around this problem
Thank you
-
- Transparent PictureBox?
by SenthilNathan
- 4 Replies
- Last post
by Peter Nowak (Germany)
- Hi,
How to make the picturebox as transparent .When i set the property to transparent in netcf 2.0 i can't make it.So how to do this
-
- Moving Files with compact framework by date
by GJohnston
- 7 Replies
- Last post
by Bruno Yu - MSFT
- I'm developing a windows mobile application that will require me to organize pictures into different directories.
The best solution I can come up with is to have the user hit a "Begin" button and time date stamp it, then when the user is done taking pictures, have him hit a "finish" button. At that point I want to be able to grab all the files that were created in a static
-
- how to add missed call?
by blizzard_dog
- 2 Replies
- Last post
by blizzard_dog
- hi.
i am developing phone application based on windows mobile 5.0 smartphone.
i don't know how to add missed call .
can anyone tell me
thnx.
-
- How to start a smart device application in C++?
by rosicky1234
- 8 Replies
- Last post
by rosicky1234
- How can I start to develop a C++ smart device application as smart device application in C# and Visual Basic
-
- Cannot connect to web service on my local machine...
by CES4848
- 14 Replies
- Last post
by Zero Dai - MSFT
- HI,
I am sure there is something minor I am missing but I cannot for the life of me figure out how to connect to a web service that I have created in my local iis.
I have created a basic web service and it is running under iis. I can connect to it no problem if I create a console application and add a web referenec.
I have created a Windows mobile pocket pc project and cannot c
-
- Sending Messages from a CE Device to PC and back
by BCR
- 12 Replies
- Last post
by Ilya Tumanov
- Hello
Im having problems using MSMQ to send messages from a CE Device to a PC I have created the queues on the 2 platforms but when I try to send a message to or from I get a queue not found error. using server explorer I have verified that the PC queue exists and using msmqadm I have verified the the CE Device queue exists.
output from admadm for the CE Device Status command:
0. DIRECT=O
-
- Windows Media Player 10 on device with streaming problem
by GT_SEAN
- 4 Replies
- Last post
by GT_SEAN
- WMP 10 CF 2.0 put into a form.
used Feinman AxWindowsMediaPlayer interface and player.ctlcontrol.play().
But the content doesnot stream. What can be the problem
used servers: desktop media player 11's media share, UPnP media server. content type: WMV ASF. neither combination works.
Thanks for replying in advance.
GT_SEAN
-
- Flyout Persistence
by MarkTDev
- 2 Replies
- Last post
by MarkTDev
- Hiya,
I'm a newbie to Vista Gadgets, i've looked for a response but can't find a suitable answer so here goes...
Everytime my flyout hides and then shows, the HTML page and my iframes are reloaded. Is there anyway I can stop it from doing this
(i'm using System.Gadget.Flyout.show = true)
I want to be able to retain the state of the HTML page when it is hidden so when i
-
- .Net Runtime 2.0 Error
by mathie
- 1 Replies
- Last post
by Ilya Tumanov
- Hi, I've got problem with IIS 6. When i want to browse my site, here's come the error from the Windows Application Log "Faulting application w3wp.exe, version 6.0.3790.1830, stamp 42435be1, faulting module kernel32.dll, version 5.2.3790.1830, stamp 424377d2, debug 0, fault address 0x00015dea." Does anyone can help with this error Best Regards, Matius
-
- Creating a transparent Form
by Sukant Gujar
- 2 Replies
- Last post
by Sukant Gujar
- Hi,
I need to know if there's a possible way to create a trasparent (if not translucent) form in Windows Mobile 5.0 managed application. I need it to show parts of the Today screen.
Thanks and regards,
Sukant Gujar.
-
- Device specific content rendering in framework 2.0
by Bharani Dharan
- 1 Replies
- Last post
by Ilya Tumanov
- Hi All
In my current scenario, i do device specific rendering (html, wml11, wml12) on framework 1.1. i profile new devices which comes into market, add to config folder, and update my machine.config. Im planning to migrate to Framework 2.0. Now
How do i specify or where shld i specify to render the desired content, whether to render wml11/Edge in framework 2.0
Do i need to add the
-
- IMG in sceen today
by D1eg0
- 6 Replies
- Last post
by Alexander Ignatyev
- hello to all.
I do not speak English.
I need to agragar an image that is not an icon in screen today
it is possible
thanks. greetings.
-
- flyout text not selectable
by rumremix
- 3 Replies
- Last post
by rumremix
- The text displayed in the flyout of a gadget I've created is not selectable.
Is there any way to make it selectable
-
- Smartphone - Disable Multiline Textbox Enter Edit Mode
by Drudkh
- 4 Replies
- Last post
by Drudkh
- Hi, does anyone has any clue on how to disable edit mode on a multiline textbox on smartphone I'm programming in VB.Net and I've tried to handle on KeyDown event but it still enters into edit mode when the action key is pressed.
-
- Screen Orientation in Windows Mobile 5.0 using CF 1.0
by itvinoth83
- 6 Replies
- Last post
by Serge Chernetsov
- How can I get what is current screen orientation (portrait or landscape) on Windows Mobile 5.0 devices using c#
I am using Dot Net Framework 1.0.
And I also want to change it using dotnet compact framework 1.0.
-
- Shared Folders and Files
by MikeM22
- 2 Replies
- Last post
by MikeM22
- I am having an issue accessing a shared file in C#
Directory .Exists( @ \\Mike\\Share1 );
woks \Mike\\Share1 is a shared folder but when I try
File .Exists( "@\\Mike\\Share1\\mechData.txt" );
It always returns false eventhough I can see it using the file explorer.
Is there any way I can access or copy this to non shared directory on my mobile device
I have
-
- Key Press Events
by Goshpiderman
- 6 Replies
- Last post
by Steven Bone
- Hi Guys I want to disable all of my device's keys. Is it possible How can I do that Thanks
-
- accessing messages within the message store using a SmsMessage
by stevellu
- 2 Replies
- Last post
by Christopher Fairbairn
- Looking through the documentation I found that as of now it not possible to access the sms message store using managed code api. Instead I choose to use MAPI native code in order to access these stored messages. My question is if the entryID's of messages returned by MAPI can be used as an equivalent to the ItemID needed to instantiate a SmsMessage object. My hope is to use the managed SmsMessage
-
- javascript src problem
by BLaZuRE
- 2 Replies
- Last post
by BLaZuRE
- For some reason, my gadget was doing fine until I reopened the gadget after making a few changes. When I reopened the gadget, none of the javascript responds, including no settings icon. However, if I put some of the javascript into my gadgethtml.html file, it works fine. My javascript is in a separate file: gadgetjs.js. I'm using that for source for my gadgethtml.html and flyout.html files.
-
- Custom LAP question
by Tony_NTFY
- 6 Replies
- Last post
by Tony_NTFY
- I'm creating a custom LAP for WM 5 and WM 6 devices. What do I need to do to
have the device wipe itself after a certain number of failed attempts from the
user trying to enter their password
Thanks.
-
- Copy and Delete Records from 2 tables in the same DB
by Eran Harel
- 3 Replies
- Last post
by AlexY
- Hi All,
I need to copy some records from a specific table to a different one.
The Second table - "HistoryTable" (The one that will get the new records) had the same fields except extra filed for a timestamp of the copying date.
What is the best way to do so
Can I do it in a bulk way...all together from a DTR for example
Can I delete from the first table at once
-
- RAS connection
by Block54
- 6 Replies
- Last post
by Block54
- I would like to know if it is possible to programmatically establish a RAS connection on a Smart Device with Windows CE 5.0.
I had tried to make a DLL on EVC++:
#include "stdafx.h"
#include "WPRASAPI.h"
#include "ras.h"
BOOL APIENTRY DllMain( HANDLE hModule,
DWORD ul_reason_for_call,