Smart Device Development

Page 1250




  • Topics
    Replies
    Last post
  • Can we use PCI Board with Device Emulator(Similar to CEPC)
    by AmitBansal
    4 Replies
    Last post by Michael Koster
      • Hi, We have a companion chip board(containing Display,RAM,Camera,Hardware chip etc), which can connect to PCI slot of PC. Earlier in CEPC, we use this setup to develop our companion chip hardware drivers(e.g. display,camera,sdhc etc). It means x86 used as host cpu and harware chip as a companion processor. Since from AKU3.1 onwards, its not suggestible to use CEPC for devlopment, we want to
  • CompactFramework Supported DataBase
    by windows_mss
    3 Replies
    Last post by EntitySpaces
      • hi, im newbie to Compact Framework, one clarification what are all the database supported by the compact framework v1.1 , Thanks in Advance,
  • InvalidProgramException after converting from VS 2003 to VS 2005
    by SenthilNathan
    2 Replies
    Last post by vistaprg
      • Hi, I convert the application which was developed by using netcf V 1.0 to netcf V 2.0. I am facing the exception InvalidProgramException in InitializeComponent() while i assign image to picturebox. For example in get exception in the place Me .PictureBox1.Image = CType (resources.GetObject( "PictureBox1.Image" ), System.Drawing.Image). So if anybody faced this problem k
  • MSMQ Over http in .net cf 2.0
    by Deepthi Rao
    14 Replies
    Last post by Deepthi Rao
      • Hi, I am trying to use msmq over http (or srmp) in a smart device application (.net cf). I have been able to send messages over http in a desktop application ,but I am not able to do the same in .net cf. Is msmq over http supported in .net cf 2.0 For Windows Server 2003 I had to install a msmq over http component , is there something similar that needs to be done on the device/emulator Am I
  • Sidebar did not appear any more
    by kymf
    14 Replies
    Last post by Mannz
      • Please help me Sidebar did not start up automatically after my computer starts, even i double clicked the Windows Sidebar it dosn't appear also (nothing happened). What should I do
  • New version V9 of C# IDE Mobile
    by HarveyR
    13 Replies
    Last post by HarveyR
      • New version V9 of C# IDE Mobile C# IDE Mobile is an application (totally free) that I've developed to be able to develop with C#/.NET2CF directly on the Pocket PC-Windows Mobile 5/6 (it doesn't require the .NET SDK, you don't need a desktop computer). You can download the new version at: http://www.geocities.com/hrowson/wm5_software/index.htm or from my personal page:
  • Is it possible to host Web Services with .NET Compact Framework 3.5 in windows mobile?
    by Ranju_Akram
    1 Replies
    Last post by Ilya Tumanov
      • Hello Everyone, I am working with .NET Compact Framework 3.5 in Orcus and planning to write an application in windows mobile. Is it possible to host a Web Service using Compact Framework 3.5 Any good sources of information related to this Regards, Ranju
  • Overload resolution failed because no accessible 'New' can be called with these arguments:
    by Vajz
    1 Replies
    Last post by Lars Brange
      • Hi, I was trying to declare a new data adapter and vb didnt seem to like it very much. The code line and the error is as follows; Private data_adapter As SqlCeDataAdapter = New SqlCeDataAdapter(sqlCmdSel, cn) Overload resolution failed because no accessible 'New' can be called with these arguments: 'Public Sub New(selectCommandText As String, selectConnection As System.Data.SqlServerCe.SqlCe
  • How to close the login form?
    by Joey Hsiao
    6 Replies
    Last post by Jelly Bum
      • I am using C# to write a application in Windwos Mobile 5. My application starts with a Login form, and if login successfully, it will show an index form. I've tried to close the Login form but the whole porgram ends. Can anyone give me some hints or sample code Thank you so much. -Joey
  • table via DOM in IE
    by MikeE0815
    2 Replies
    Last post by MikeE0815
      • Hi all, I have a problem using a table on my webgadget. The following code works fine with Firefox and Opera, but IE shows nothing. The only way I can draw a table in IE is via m_options.innerHTML = "<table><tr><td>bla bla</td><td></td></tr><tr><td>bla bla</td><td></td></tr></table>"; which is afaik prett
  • Barcode reader does not see ENTER
    by Jwembley
    7 Replies
    Last post by SeuFernao
      • Using VB 2005 to create simple data entry program to run in Windows CE 5.0 on a Datalogic Memor. Reading a barcode running any program other than the one I am creating a clf is read. This tells me the scanner is working properly but program does not see the clf. Any suggestions on what might be the probelm
  • Hiding Border of textbox in Windows Mobile 5.0 Smartphone 1.0 device
    by amitchintawar
    8 Replies
    Last post by Christopher Fairbairn
      • Hello All, I'm developing a SMS application in which for editing text I need a textbox without border. But there is no Border style property available in textbox in CF 1.0 for smartphone. Can anyone help me on how to hide the border of textbox when it is selected(i.e. textbox gets focus.)
  • Astoria is out for VS 2008 Beta 2 (September 2007 CTP)!! YAY!
    by Kevin Hoffman
    13 Replies
    Last post by Pablo Castro - MSFT
      • Ok, so perhaps I'm a little more excited than I should be... but this basically untied my twiddling thumbs for a fairly important project that I'm working on, so I finally get to move forward on it. One question I do have is this - why is it that we cannot create an IIS-hosted Astoria project Using the "File -> New Project" approach, it allows me to only create a filesystem-bas
  • unable to retain session of web service when using .net CF application
    by Amit Verma1
    2 Replies
    Last post by Amit Verma1
      • Hello, I am using web service and .net CF2.0 for my development. I am using sessions in web service and also soap headers for authenticating the web methods requests. In simple asp.net we can retain session of web methods by using cookie conatiner. I hope one can understand if he has worked on sessions in web service or we can have the link to understand this http://support.microsoft.com/k
  • CAB file won't install on emulator 2.0
    by CUdev-Bob
    9 Replies
    Last post by Ilya Tumanov
      • Hi all, I'm trying to migrate all my device projects to run on Mobile 6.0, as our customers are requesting to use those devices when available. My projects have all been built in VS2005 and target the PPC2003 devices. Since I don't have an actual device, I installed the WM 6.0 SDK Refresh to get the Device Emulator 2.0, and I have run into a couple of issues: (1) My existing CABS w
  • Embedded VC++ 4.0 SP1 Applications Crash when compiled on some laptops.
    by Smee Again
    0 Replies
    Last post by Smee Again
      • We have developed quite a complex industrial application to run on a Geode GX1 (X86) platform with Win CE 4.10. We are using EVC++ 4.0 Service Pack 1, The vendor stopped the platform build at SP1. There are other issues if we install SP2 or above. The application uses MFC, it is a multi threaded application with TCP/IP support. Essentially the application monitors digital and analog inputs,
  • SideBar Gadget and <object /> Tags
    by Shawn Wildermuth - MVP &am
    5 Replies
    Last post by Jonathan Abbott
      • I assume that SIdebar is using a mini-IE7 window to display themselves, but I can't seem to get an <object /> tag to work in my gadget. Any idea why that wouldn't work Before I spin my wheels understanding what is happening, I wanted to make sure that there wasn't a security prohibition to using an <object /> or a <embed /> tag.
  • How to store images into .sdf datbase
    by srini499532
    1 Replies
    Last post by Ilya Tumanov
      • Hi can anybody help me ... i created .sdf database in that one table for storing images..help me how to load images into that table when my vb.net form loads.
  • PDA write a signature with the stencil in a text box.
    by steve1_rm
    2 Replies
    Last post by Alex Yakhnin MSFT
      • Hello, I have created a PDA application using VS 2005 in VB and CF 2.0. The customer wants to be able to write their signature using the stencil into a text box. This will then be saved to a SQL Server 2005. Is there a method which the user can write their signature into a text box Another problem is how will this be saved to the database will it have to be a picture or
  • Wrong Watch variables during Debugging native X86 applications with VS 2005 under CE 5.0
    by Thomas Kilb
    0 Replies
    Last post by Thomas Kilb
      • Hello, we ported a huge MFC application ( compiled debug EXE size approximatly 3.3 MB ) from eVC 4.0 to VS 2005. Now we have the problem with wrong watch variables during a debugging session. If we set a breakpoint and try to watch simple int varaibles we get wrong values without any reference to the program context. The program itself works fine without mistakes. Is there something wrong with t
  • Add Recipients...
    by Vinny75
    0 Replies
    Last post by Vinny75
      • I am trying to create an addin for SMS that will add a "Add Recipients..." options to scroll through a listbox of contacts and check all the names to send a text to instead of having to select one at a time. Is there a way to interact with the default compose text form, to retrieve and add recipients Or will I have to create a new form all together
  • Multi-threading and Static classes
    by Jonathan.Peppers
    14 Replies
    Last post by Jonathan.Peppers
      • I have a static class I've built that creates a HttpWebrequest and grabs a file from a server (sometimes polling file). You would use it like so: Server.Get(" www.google.com ") and that would return a string. My issue is that when multiple threads are calling this at once from ThreadPool.QueueUserWorkItem(), a System.Threading.Timer or just the main thread, sometime
  • Native method call failed. (Microsoft.WindowsMobile.PocketOutlook.Utilities.CheckHRESULT())
    by Karan Singh
    6 Replies
    Last post by Karan Singh
      • Hi, I am developing application for PDA in Windows Mobile 6.0 environment in which i am dealing with Outlook items. Here i retrieve Outlook items as under : using Outlook = Microsoft.WindowsMobile.PocketOutlook; public List <Outlook. Appointment > GetQueriedOlItems( ) { List <Outlook. Appointment > queriedOlItems = new List <Outlook. Appointment >
  • System.Gadget.Flyout.file gives unspecified error
    by Luis Miguel Abreu
    9 Replies
    Last post by Docthomas
      • Hello guys. the following code is giving a javascript error which says "unspecified error": System.Gadget.Flyout.file = "channel.htm" ; System.Gagdet.Flyout.show = true ; Any clues on why this is happening btw, the file property is the only one that is missing. thanks a lot.
  • Capture Back Key
    by Mauricio Mayer Soares
    2 Replies
    Last post by Ckuhar
      • Hi everybody I'm trying to capture the Back Key on Smartphone on my C# code using this code below this .KeyPress += new KeyPressEventHandler(OnKeyPress); .... // Rest of code private void OnKeyPress(object sender, KeyPressEventArgs ke) { // Determine if ESC key value is pressed. if (ke.KeyChar == (Char)Keys.Escape) { // Handle the event to provide functionality. ke.Hand