WPF/E Namespace Confusion 2006? 2007? While dissecting the WPFEPad application I found on Mike Harsh's blog, I noticed that all the XAML files used in that example use the namespace declarations:
<Canvas xmlns='http://schemas.microsoft.com/winfx/2006/xaml/presentation' xmlns:x='http://schemas.microsoft.com/winfx/2006/xaml'>
etc
Up to now I had always thought that the agControl would only accept XAML files with the following namespace declarations:
< Canvas xmlns='http://schemas.microsoft.com/client/2007' xmlns:x='http://schemas.microsoft.com/winfx/2006/xaml' >
But alas, the former works as does the latter. Now, using the former is fantastic, since I can now author the xaml in Blend, and, as long as I'm careful not to add schematic constructs that aren't supported in WPF/E, I am in good situation.
But really, what gives here Does it matter Or have I just stumbled onto a little quirk and should be thankful for it.
Kevgor
Tag: Media Foundation Development Media streams rate control ? Architecture
books on Programming for VPL/MSRS My name is Sara Morgan and this summer I will be writing a book on MSRS for MS Press. The book will not be available until the end of the year or early next year.
If you have topics that want to see included or specific information that you think should be incorporated, please feel free to send me email at sara.rea@custsolutions.net and I will do my best to see that it is included. I will also let everyone know when the book becomes available for pre-order.
Thanks,
Sara Morgan
http:\\www.custsolutions.net
Sara Tag: Media Foundation Development Media streams rate control ? Architecture
Can i convert Graham process chart to Visio diagram? I got a complex diagram created using "Graham Process Mapping 6.0".
http://www.processchart.com/
How can i covert Graham process chart to Visio diagram . Please help me. Tag: Media Foundation Development Media streams rate control ? Architecture
Audio noise reducing Hi All,
I have sample avi file where i need to reduce the unwanted noise.Can we do that using C# and .net framework.If so how can we do that.Please help me in this.
Regards
Ravindra Tag: Media Foundation Development Media streams rate control ? Architecture
BizTalk DSPI Hi I found a document in <Microsoft BizTalk RFID Install Dir>/Documentation/Device Service Provider Interface.doc - headline Design Specification Tag: Media Foundation Development Media streams rate control ? Architecture
DSS design considerations for a Winform orchestrator application What is the better approach :
1. Creating and calling a Winform from within an orchestrator service (Robotics Tutorial 4 C#)
2. Creating a winform application from scratch, hosting DSS, and orchestrating the services directly within the Winform application (similar to Hosting tutorial #4).
I'll be coordinating about a dozen or so different services. Choice 2 seems like the simpler choice. Are there any considerations
Thanks! Tag: Media Foundation Development Media streams rate control ? Architecture
"No search node for 'select'" warning in Sonic Emulator I don't think the problem there is with using a seq. On your first cue, you are calling set, but you have no select in the cue. On your second cue, you are calling set and animate in the same cue. I think this is acceptable in the spec, however I believe that some players will not handle this correctly - you might want to break that up into 2 cues. Tag: Media Foundation Development Media streams rate control ? Architecture
Controlling robot in the simulation I read robotics tutorial 4 where is precisely written how to control Lego NXT if you have HW. But how do I control robot in the simulation - e.g. Pioneer 3dx in the simulation tutorial 2 Tag: Media Foundation Development Media streams rate control ? Architecture
MSRS CTP 1.5 .. what is password? I did install MSRS CTP 1.5 today.
so, I made a simple service and running.
when I connect to my localhost (ex http://localhost:50000/console/output ), it ask a ID and password.
I did try everything. but I couldn't connect.
What is this could you do me a favor Tag: Media Foundation Development Media streams rate control ? Architecture
How do we do a clean install for Feb CTP? You should have the new script if you've installed the new version. When I installed the new version I had the new aghost file. Tag: Media Foundation Development Media streams rate control ? Architecture
Web search from taskbar toolbar i've had WDS 3.01 installed on XP SP2 a while now,but recently i cannot
search the web from the taskbar box. when IExplorer opens, it has the correct
search words and arguments, but fails to put in the search engines address (i
use google) for example:
http:/// %20how%20can%20i%20fix%20this
i've tried setting IExplorer (7) default search from google to yahoo but
still the same result.
Many thanks for any help. Tag: Media Foundation Development Media streams rate control ? Architecture
Getting SoldToName in Pipeline Component How do you reference the context value in the pipeline component Tag: Media Foundation Development Media streams rate control ? Architecture
Interest in HDi authoring workshop? Well, Together with THX, BPL, and Microsoft we will be begining the VC-1 Certification program in Oct. It will be a 3 day comprehensive course covering everything from iyuv creation to QC methods. It looks as if it will be less than 1,000$ which is a bargain (~330.00$ per day). I would like to cover paralel encoder hardware setup as well, but that may be another course. Tag: Media Foundation Development Media streams rate control ? Architecture
Type xxx is not marked as serializable? Good Morning!
If anyone has any thoughts on this error we would love to hear them!
The problem is very intermittent. Orders are being submitted fine most of the time.
The ProgID appears to be Commerce.QueryCatalogInfo -- which I believe is the very first stage in the Basket pipeline.
The error message is a little confusing though. Does this mean we are passing a CommerceResourceCollection object into the pipeline... when we shouldn't be
Thanks in advance!
Glen
Framework version: 2.0.50727.166
Exception Details: System.Runtime.Serialization.SerializationException: Component Execution failed for component[0x0] hr: 0x8013150C
ProgID: Commerce.QueryCatalogInfo
Type 'Microsoft.CommerceServer.Runtime.Configuration.CommerceResourceCollection' in Assembly 'Microsoft.CommerceServer.Shared, Version=6.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' is not marked as serializable.
Server stack trace:
at Microsoft.CommerceServer.Interop.PooledPipelineClass.Execute(Int32 lMode, Object pdispOrder, Object pdispContext, Int32 lFlags)
at Microsoft.CommerceServer.Runtime.Orders.PipelineHelper.RunPipesHelper(String strPCF, String strPipelineProgId, IDictionary dictOrderForm, IDictionary pipeContext, String logfile)
at Microsoft.CommerceServer.Internal.Orders.MtsHelper.RunPipes(String strPCF, String strPipelineProgId, IDictionary dictOrderForm, IDictionary pipeContext, String logfile)
at System.Runtime.Remoting.Messaging.Message.Dispatch(Object target, Boolean fExecuteInContext)
at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext) Tag: Media Foundation Development Media streams rate control ? Architecture
Regarding Event Processing Hi there Just needed to confirm that event processing is done only once per tick and too at the start of the tick. Right And that multiple controller events can be processed in the single tick. thanx in advance Tag: Media Foundation Development Media streams rate control ? Architecture
architecture guidance. hi michael
thanks for the valuable information.the links you provided was really nice.
is there any other source like this for database connectivity.
i need to create a common package that supports oracle,ms sql, ms access and it should be extensible in future.
do you provide any architecture guidance in this area..
thanks and regards
baskar k Tag: Media Foundation Development Media streams rate control ? Architecture
Desktop Customiser Nice article I just made a random background changer in C# sort of like your wallpaper genie except it was a little more featured. Probably because it wasn't meant to be an article, but either way real nice job Tag: Media Foundation Development Media streams rate control ? Architecture
Flat File Dissassembler I am reading a simple flat file with \r\n delimited records. The schema validates fine, but when I try to use the orchestration to read it I always get the "Unexpected end of stream while lookng for \r\n" message. I've chaged the lookahead_depth to "0" and parser_optimization to "complexity". I'm new to BizTalk, but it seems to me this should be a 10 minute setup, but I'm burning hours trying to debug this error with no luck. Example of file:
Date: 01-25-2005 Start Time: 11:36:25 Stop Time: 13:09:41 Location: Not Specified
I just want to read in each line, but get the \r\n error. Tag: Media Foundation Development Media streams rate control ? Architecture
OOB stream inspection for non-TCP data Hi, I am implementing an OOB terminating callout which registers at FWPM_LAYER_DATAGRAM_DATA_V4/V6 (among other layers). As far as my understanding goes at this layer the callout's classifyFn gets the transport payload thru pLayerData parameter and it does not contain the transport header, which makes sense because for the outbound case the transposrt still has not gotten the data. Now I would like to hold on to the data (NET_BUFFER_LIST), perform inspection and at a later point inject the data back to the stream. In order to simplify the discussion lets assume only outbound UDP data. Questions: 1. Is it enough to just reference the buffer list and then dereference it when I am done with the injection - FwpsReferenceNetBufferList0/FwpsDereeferenceNetBufferList0 or should I make my own clone via FwpsAllocateCloneNetBufferList0 The reference seems like a faster operation with the downside that it may possibly starve the tcp/ip engine. 2. Is classifyOut->actionType = FWP_ACTION_BLOCK; enough for setting the status Isnt this going to result in an error returned to the app that is trying to send the data 3. In order to inject back the data it seems that the only option for outbound UDP is FwpsInjectTransportSendAsync0. Unfortunately to me this sounds like I'll have to create the UDP header myself - compute the checksum, etc. Is this the case Isn't there an API for non-TCP stream data that is similar to FwpsStreamInjectAsync0 Thanks! Tag: Media Foundation Development Media streams rate control ? Architecture
windows vista the audio service is not running Hi, I hope you've fixed you problem. I've seen a slew of these Vista problems concerning the Audio Service not wanting to start( re start ) I just got some excellent speakers which I'm dying to try out. The new drivers doesn't fix the problem, nor going to the securities settings. If You've figured a way out of this quagmire, I'd appreciate a heads up. this was a post I copied which mirrored exactly what happened to me three days ago.
i have windows vista Ultimate. and Sound card: Realtek High Definition Audio and Creative SB Audigy. both have latest driver instaled running fine on Device Manger. (This device is working properly.)
but on Sevices i can't start/run windows Audio. Windows Audio Endpoint Buidler is running fine.
i have tried following 2 method but still not working 1) windows Audio >> Properties >> logon tab >> i have check on "Local system Account" but when i try to start i get follwoing error Windows couldnot start the Windows Audio Service on Local computer. Error 1079: the account specified for the service is diffrent from the account specified for other service running in the same process. 2) windows Audio >> Properties >> logon tab >> i have check on this account "Local Services" but when i try to start i get follwoing error Windows couldnot start the Windows Audio Service on Local computer. Error 1297: Aprevilege that the service require to function properly doesnot exist in the service account configuration. you may use the services microsoft management console (mmc) snap-in (services.msc) and the local security settings mmc snap-in (secpol.msc) to view the service configuration and the account configuration.
please help thanks
anyway I find a bunch of nonsense and nothing which would fix the problem except reinstalling windows which I do NOT wish to do. I've four month of work and don't want to go through the whole reinstall the software.
thanks Tag: Media Foundation Development Media streams rate control ? Architecture
Commerce Server StarterSite Troubles I get this error after a fresh setup of the startersite, when i test if the diffrent webservices are running.
Server Error in '/OrdersWebService' Application. Tag: Media Foundation Development Media streams rate control ? Architecture
BizTalk message doesn't have all data returned by service We have a simple orchestration. It Receives and inbound XML file ("C:\Input\inbound.xml"), calls an ASMX web service (through a typical "Web reference"), and Sends the response message to disk ("C:\Output\{messageid}.xml"). Very typical.
Problem is, when we look at any given message being returned, either in the location of the Send port or through HAT message tracking, the XML is only partially there... that is, the web service's response type is a "custom .NET class" that includes 5 or 6 layers of "parent object-child collection-child object" hierarchy, and only the first couple layers of parents/children are being returned.
If I call the same service from a simple WinForm test harness, all the data is there, as is evidenced through the Watch window, i.e., it's able to recreate the entire response message as a .NET object instance (of the proxy classes), and it includes all levels of parent/children. So I don't think it's what the service is returning - I think it's what BizTalk is seeing (or not seeing.)
One thing I thought it might have something to do with is the fact that the "custom .NET class", the return type of the service method, does inherit from another class... problem with this theory is that the inherited properties are coming through just fine... it's the properties of the inheriting class that don't come through, of which there is exactly one, and it is a custom Type that inherits from "List<>".
So:
Code Block
[ DataContract (Namespace = "http://Xyz.DataContracts/2007/07" , Name = "EnrollmentFeedDataContract" )]
public partial class EnrollmentFeedDataContract : MemberDataContract
{
private Bop . DataContracts . FsaEnrollmentListDataContract FsaEnrollmentListField;
[ DataMember (IsRequired = true , Name = "FsaEnrollmentList" )]
public Bop . DataContracts . FsaEnrollmentListDataContract FsaEnrollmentList
{
get { return FsaEnrollmentListField; }
set { FsaEnrollmentListField = value ; }
}
}
(FsaEnrollmentListDataContract is the type that inherits from "List<>", and in the resulting XML response, is the piece that is missing... the properties of MemberDataContract, not shown here, do come through in the XML. I don't actually think it has to do with the fact that it's a collection/list, as there is a simple DateTime property that also doesn't make it to BizTalk.)
(You'll notice the WCF attributes, though I've been talking about it as an ASMX web service. It started off as WCF, but we're using BizTalk without R2 and so I put an ASMX facade over the underlying functionality. Which works pretty well in every other way I've used it - just not in a BizTalk orchestration.)
Another wrinkle... After the "Send" to "C:\Output", which should output the raw XML received, I have another step in the orchestration to do a transform from the response schema to a different schema, and a simple "Send to disk" again. If I look in the Orchestration Debugger, the construct/transform and following steps are never performed. BizTalk never shows any errors for any of it.
It's all very strange to me. I've tried playing with schemas, updating the web reference, using System.Xml.* attributes on the properties (such as XmlElement (nullable=false) and so on, but haven't been able to get missing child elements to ever show up.
If anyone has any idea what I'm talking about and better yet has any idea what's going on here, your help is very much appreciated.
Thanks.
- Jesse Tag: Media Foundation Development Media streams rate control ? Architecture
Cross enterprise security by microsoft I have to list down about the technologies(like passport, wse3.0) and tools(domain controller i am not sure can work across domains,similarly kerberos implementation) available from microsoft end for implementing cross enterprise security If some can gives names of some of them,it would be of great help for me
Guys please pore in ASAP Regards Tag: Media Foundation Development Media streams rate control ? Architecture
RC1 or RTM? Couple questions to MSFT RFID Team:
Is there the PCT available with the BizTalk RFID RC1
Should we wait for a RTM revision to implement localization in providers or did I miss it
Thanks, Tag: Media Foundation Development Media streams rate control ? Architecture
Vista search functioning, but unable to open files from results pane Hi - my machine is running Vista Business, built in indexing and search work perfectly but files cannot be opened from the search results. Is there a fix for this that anyone can advise me on
Thanks in advance for your advice. Tag: Media Foundation Development Media streams rate control ? Architecture
Il received this and i believed. What can i do now ! Here is the September version of this scam! I think that the revised emails should be posted to keep other informed. This scam seems to draw in a lot of people because it sounds somewhat real and the email suggests that they are part of these large corporations (again to make it sound more honest). The email below was received on Sept. 11th, 2007.
********************************* Beginning of Email ************************************************
Msw Award Team Baley House, Har Road Sutton, Greater London SM1 4te United Kingdom . Batch: 12/25/0340 Ref:MSW-Y/101OXI/02
Dear Prize Winner
This is to inform you that you have won a prize money of five hundred thousand pounds(¡ê500,000) for the month of June 2007 Lottery promotion which is organized by YAHOO LOTTERY INC & WINDOWS LIVE.YAHOO & MICROSOFT WINDOWS, collects all the email addresses of the people that are active online, among the millions that subscribed to Yahoo and Hotmail we only select five people every Month as our winners through electronic balloting System without the winner applying,we congratulate you for being one of the people selected.
PAYMENT OF PRIZE AND CLAIM You are to contact your Claims Agent with immediate effect to faciliate the protocol of your winning prized before the date of Claim,Winners Shall be paid in accordance with his/her Settlement Centre Prize must be claimed not later than 15 days from date of Draw Notification after the Draw date in which Prize has won. Any prize not claimed within this period will be forfeited.These are your identification numbers:
Batch number...................12/25/0340 Reff number.......................Ref:MSW-Y/101OXI/02 Winning number...................YM09788
To begin your claim please contact our licensed and accredited agent assigned to you:
Mr. Walter Hamilton (VERIFICATION DEPARTMENT MANAGER) Email: enquires_mswawards2007claimsdept@yahoo.com.hk Tel No:+447024014407
You are therefore advised to send the following information to the claims agent to facilitate them and in order for them to have access in proceeding with the delivery of your winnings.
1. Full name:________________________ 2.Country:___________________________ 3. Contact Address:__________________ 4. Telephone Number:_________________ 5. Marital Status:___________________ 6. Occupation:_______________________ 8. Age:______________________________
Yours in service, Mrs. Marian Bern (Operation Manager)
****************************************************** End of email ****************************************
I hope that all of you have avoided this scam! If not, contact the credit reporting companies and have them lock your credit record so only you can get new credit, buy cars, get loans, etc. I heard that they have a way of doing that. It will also stop the preapproved credit card offers since they won't be able to preapprove their cards.
Good luck! Tag: Media Foundation Development Media streams rate control ? Architecture
Multiple Storyboards Ah, this was driving me insane. I was being puzzled even more as I would get the "completed" event being fired after the right amount of time had elapsed even though the subsequent animation didn't play.
Although Ed - is there any reason the subsequent animations should be started before the previous ones are stopped That seems vaguely counter-intuitive, and it seems to work fine either way (in my examples, at least). Tag: Media Foundation Development Media streams rate control ? Architecture
A Couple of questions about MRS I just joined this forum, after downloading but not installing the Robotics Lab v1.5.
I also have a general question about how Microsoft would like their MSRS to fit into real-world control systems.
Most of what I see so far is at the academic or hobby level, but it seems to me that Microsoft would like to use MSRS to penetrate the industrial controls market and integrate with PLCs, industrial robots, conveyor and process controls, and higher-level factory floor controllers.
I have been designing such systems for almost 30 years, from the mechanical and electronics, to the embedded systems, robotic control systems, and on up. The only time I have used Windows was in 1997, for a telerobotic remote operator console to unload very hazardous materials, and later in 1999 for a distributed control using C++ for the control and the operator interface in Visual Basic, communicating by event subscription through DCOM. Tag: Media Foundation Development Media streams rate control ? Architecture
How can I configuring a Property Definition as Read Only in Catalog Manager. With the current catalog system, you can limit the ability to edit all or none of the definitions. If you want a particular catalog to be read only, you can assign everyone but yourself as a "CatalogViewer".
Thanks
Sudha Tag: Media Foundation Development Media streams rate control ? Architecture
Hosting DSS Hi, In my quest to find a workaround for the webcam crashes[1] I'm attempting to wrap the dss environment in my own executable. There is a howto here: [2] ... but it's missing all the 'using' directives and I can't work out the correct references. For instance, my best guess is that ds.DirectoryPort corresponds to Microsoft.Dss.Services.Directory.DirectoryPort, but this leads to compile errors related to the arguments to ds.Get(). Is there an up-to-date version of that code snippet [1] http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=1429179&SiteID=1 [2] http://channel9.msdn.com/wiki/default.aspx/Channel9.DssPatterns Tag: Media Foundation Development Media streams rate control ? Architecture
Wilbert39
Hi
Does anyone know how to slow down RTP/RTSP media streams slightly on the fly