Cant restore the database backup in SQL server 2005?

SQL Server SMO/DMO

Index ‹ SQL Server

- Previous
  - 1
    - Error deploying large Report Model Hi , I am trying to deploy the report model which is more than 4 mb size. I am getting following error: Error 2 There was an exception running the extensions specified in the config file. ---> Maximum request length exceeded. i changed the web.config on the server side: as following:  <httpRuntime executionTimeout="600" maxRequestLength="102400" requestLengthDiskThreshold="80" useFullyQualifiedRedirectUrl="false" minFreeThreads="8" minLocalRequestFreeThreads="4" appRequestQueueLimit="5000" enableKernelOutputCache="true" enableVersionHeader="true" requireRootedSaveAsPath="true" enable="true" shutdownTimeout="90" delayNotificationTimeout="5" waitChangeNotification="0" maxWaitChangeNotification="0" enableHeaderChecking="true" sendCacheControlHeader="true" apartmentThreading="false" /> But still gets same error: what else i ahve to change. Please help!! Thanks Tag: Cant restore the database backup in SQL server 2005?
  - 2
    - Barcode doesn't print from reports server I have tried using barcode fonts without much success. However I did find a product which works very well and I highly recommend it. THe only caveat to using this product is if you upgrade it you need to go back and upgrade all your other reports that use the older version. the product is neodynamic barcode professional 3.0 for reporting services. Tag: Cant restore the database backup in SQL server 2005?
  - 3
    - Copy cube from a DB to another one Thx ! Tag: Cant restore the database backup in SQL server 2005?
  - 4
    - How to change the instance name? Hello DBA's I have installed SQL Server 2005 on a machine with named instance, but later I noticed that I created it with the wrong name than desired. Now I need to change the instace name of the SQL Server that I have installed. How can I do that Thanks Satya Tag: Cant restore the database backup in SQL server 2005?
  - 5
    - Database size allocation - where other than tables, logs, etc ???? I have a Db that is 1.7 gigs. The table data takes approximately 200megs. The transaction logs were truncated. Where else can this large size be coming from and how can I confirm DB is generally small. ~25 tables, 100 SPs, 10 views, etc. Note: I have 4 queues using SQL Notifications, but when selecting from them results in no data. Thanks Scott Tag: Cant restore the database backup in SQL server 2005?
  - 6
    - SSAS 2005 Connection For a linked server to work you either need to setup your SQL Server to be running under an account that has access to the SSAS cubes, or you need to configure the linked server to run as a specific domain account. I think you need to use the linked server properties screen from SSMS to configure an account. Tag: Cant restore the database backup in SQL server 2005?
  - 7
    - How to run DTS package/upgrade in SQL 2005. My main point was that you need support for DTS, and that this support is a separate installation item under Client Components on the Feature Selection page (Advanced button) of SQL Server 2005 Setup. Installing Integration Services does not automatically install support for DTS. At the moment, this option is labeled "Legacy Components," but it may have had a different label in the June CTP...if so, it was more clearly labeled as the DTS 2000 runtime. Installing Integration Services does install the Package Migration Wizard; however the wizard will not run without the legacy support components. -Doug Tag: Cant restore the database backup in SQL server 2005?
  - 8
    - TSQL Challenge > Views do not allow the "DECLARE" keyword. I just gave you the statement. Can you create the view Try: Code Block CREATE PROCEDURE dbo . usp_p1 @d DATETIME AS SET NOCOUNT ON SELECT COALESCE ( t . ContractID , c . ContractID ) AS ContractID , COALESCE ( t . Lastname , c . Lastname ) AS Lastname , COALESCE ( t . Firstname , c . Firstname ) AS Firstname , c . ContractValue + isnull ( ( SELECT sum ( b . ContractValue ) FROM [dbo] . [Amendments] as b WHERE b . ContractID = c . ContractID and b . EffectivityDate <= @d ), 0 ) as current_ContractValue FROM [dbo] . [Contracts] as c OUTER APPLY ( SELECT TOP ( 1 ) a . ContractID , a . Lastname , a . Firstname FROM [dbo] . [Amendments] as a WHERE a . ContractID = c . ContractID AND a . EffectivityDate <= @d ORDER BY a . EffectivityDate DESC ) AS t WHERE c . DateCreated <= @d GO CREATE VIEW dbo . vw_v1 AS SELECT COALESCE ( t . ContractID , c . ContractID ) AS ContractID , COALESCE ( t . Lastname , c . Lastname ) AS Lastname , COALESCE ( t . Firstname , c . Firstname ) AS Firstname , c . ContractValue + isnull ( ( select sum ( b . ContractValue ) from [dbo] . [Amendments] as b where b . ContractID = c . ContractID and b . EffectivityDate <= DATEADD ( DAY , DATEDIFF ( DAY , 0 , GETDATE ()), 0 ) ), 0 ) as current_ContractValue from [dbo] . [Contracts] as c OUTER APPLY ( SELECT TOP ( 1 ) a . ContractID , a . Lastname , a . Firstname FROM [dbo] . [Amendments] as a WHERE a . ContractID = c . ContractID AND a . EffectivityDate <= DATEADD ( DAY , DATEDIFF ( DAY , 0 , GETDATE ()), 0 ) ORDER BY a . EffectivityDate DESC ) AS t WHERE c . DateCreated <= DATEADD ( DAY , DATEDIFF ( DAY , 0 , GETDATE ()), 0 ) GO AMB Tag: Cant restore the database backup in SQL server 2005?
  - 9
    - Accesing offline cubes with MS Excel 2003 Hi, I created offline cube (.cub file) with SQL Server 2005 Analysis Services. Accessing the offline cube with MS Excel 2003 I get an error message: "Unable to obtain list of tables from the data source". I can access the offline cube with MS Excel 2003 only when MS Excel 2007 is instaled. After uninstaling MS Excel 2007 the same error ocures. I have MS Excel 2003 (11.8146.6568) SP2, Microsoft SQL Server 2005 Analysis Services 9.0 OLE DB Provider, Microsoft Core XML Services (MSXML) 6.0 instaled. Thanks for help, Martin Tag: Cant restore the database backup in SQL server 2005?
  - 10
    - Disaster Recovery - How to verify my 2005 standard databases using 2005 express How to verify the "Full" backups of an online database. Running MS SQL 2005 on Windows 2003 server using windows domain authentication Obtaining nightly backups of the application databases & the system databases Installed MS SQL 2005 Express SP2 on a workstation My task is to take the FULL BAK file(s) and recreate the database on the workstation for Disaster Recovery verification. What parameters do I need to tweak Do I need to import the System databases from the server What security issues must be satisfied to connect on the new machine Tag: Cant restore the database backup in SQL server 2005?
  - 11
    - How can we create cubs in sql server 2005 BI How can we create cubs in sql server 2005 BI Tag: Cant restore the database backup in SQL server 2005?
  - 12
    - Can't Get SQL Authentication to work With XP Pro SP2 in very simple test case I'm trying to work my way through the steps of using a User Id and Password in a connection string. I'm working with SQL 2005 Express, VS2005, in the development server. Got an error I can't get around...tried it several diffent ways on a slightly more complicated test site...no joy...so went to the MSDN tutorial...made the most "vanilla" test I could think of, and still can't figure it out. I thought it would be simple enough that I could post the whole thing (below) The test works fine with Integrated Security = True in the connection string. When I remove that phrase, I get the error: {"CREATE DATABASE permission denied in database 'master'. An attempt to attach an auto-named database for file E:\MyPath\App_Data\VSST_DB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."} This occurs on the cn.Open statement below. It gets past the login, so I know that the SQL User and password match up correctly. ========================== <connectionStrings> <add name="VSST_CN" connectionString="Data Source=MyServer\SQLEXPRESS;AttachDbFilename=E:\MyPath\App_Data\VSST_DB.mdf;User Id = VSST; Password=vsst123" providerName="System.Data.SqlClient"/> </connectionStrings> ========================= Page Code Behind (no controls on page) ------------ Imports System.Data Imports System.Data.SqlClient Partial Class _Default Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim cn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("VSST_CN").ToString()) Dim cmd As SqlCommand = New SqlCommand("SELECT COUNT(*) FROM VSST_Table", cn) cn.Open() Dim rdr As SqlDataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection) rdr.Read() Response.Write(rdr(0).ToString()) End Sub End Class ================= The DB Table VSST_Table, ID is int, primary key, identity Field1, Field2, Field3, Field4, Field5 are varchar(50) I added one record ("A", "B", "C", "D", "E") to the table through VS2005 Server Explorer This shows up in Count = 1 from running the page when Integrated Security = True ================= In SSMSE: (this is ALL I did, tried to use the minimum so not to confuse...) I added the SQL Authentication Server level user "VSST" with the password "vsst123" (and the login works, as noted above) I attach the .mdf I add VSST to the Database Users, and give it db_owner I add VSST to the Table with all permissions checked. ===================================== I can't figure this out. This is a very vanilla test and I'm stumped. I'm about to give up on SQL Authentication entirely (at least for now), and just try to filter my inputs for SQL Injections...that's the only reason I have (at this stage in my biz plan) for needing SQL Authentication. On the other hand, I really don't like being this stumped on something that is so widely promoted as a common practice. Any help on this would be greatly appreciated. Thanks! Tag: Cant restore the database backup in SQL server 2005?
  - 13
    - Using Array Variable in ForEach Loop Container Hery Susanto WR wrote: One more question Ravi, when I put the value into variable, can I get that value inside Script Component my plan is establish the flat file connection inside Script Component and get the data row by row using Synchronous method and push it into database. Is that a problem Thanks in advance. Yes you can. You can pass the variable to the script component. Tag: Cant restore the database backup in SQL server 2005?
  - 14
    - Database corrupt on power loss Thanks. We will change the code to use transactions. Tag: Cant restore the database backup in SQL server 2005?
  - 15
    - tfs installation issue !!!!!!!!1 i had SP1 of visual studio and TFS installed on my server but it didnt work and i had a server failure, so i removed the SP1 after doing this i had this error: " Team Foundation Server does not exist or is not accessible at this time. Technical information (for administrator): HTTP code 503: TF30059: Fatal error while initializing web service " after searching on line i found that there is problem in version number of Microsoft.TeamFoundation.VersionControl.Server.dll file so i changed it to be compatible with TFS version number. by dowing this the following erro appeared " Please contact your administrator. There was an error contacting the server. Technical information (for administrator): HTTP code 500: Internal Server Error " after that i removed the TFS and tried to reinstall it on the same server, here i had the following error: "Error 28922.TFServerStatusValidator: ErrorConnectingToDatabaseWhenImpersonated - Most likely the service account doesn't have permission to access TFS database (because the tool succeeded connecting to the TFS database as the current user - user running setup)" and here im totaly stuck , coz the user of services can connect to sql server , i used the sevice account to connect to sql server and connection was established successfully. Tag: Cant restore the database backup in SQL server 2005?
  - 16
    - Connection Error from ASP.Net under IIS: provider: Named Pipes Provider, error: 40 We experience the 40 error when our Asp.net code runs under IIS and uses named pipes to a sql server 2005 named instance. We've tried all suggestions found on blogs and KB articles such as making sure the named pipes protocol is enabled, making sure the Browser service is started, making sure Allow Remote Connections is enabled, making sure we're not using Asp.Net 2.0 membership providers, and the list goes on and on. We boiled it down to a simple test scenario. We open a SqlConnection to the sql 2005 box in the code with the intention of binding a datareader to a gridview, but it never gets that far because the connection.Open() fails. If we run this test application as a virtual directory in IIS and Asp.Net 2.0, the connection.Open() fails. If we run this test application from Visual Studio .Net using Cassini (PWS), the connection.Open() succeeds and binds to the gridview. What could be causing the connection to fail under IIS but succeed under Cassini We've tried setting IIS to run as a domain user and with digest authentication enabled. That made no difference. Any help or insight is appreciated! Tag: Cant restore the database backup in SQL server 2005?
- Next
  - 1
    - How to move Full Text Catalog SQL 2005??? I figured this out without much help from Microsoft or the internet...but it seems that my lack of restore knowledge was my downfault. It seem sthat when restoring a database with Full-Text Catalogs using the nice "wizard", you have the option of moving the databases AND the Full-Text Catalogs. I was trying way to hard to make this work using line commands which eventually foobared my last few transaction logs so I lost a few hours of data...no big deal in this project, glad it wasn't mission critical. Tag: Cant restore the database backup in SQL server 2005?
  - 2
    - How to programmatically set column mappings of a simple data flow task? Sorry Donny. it looks good to me! If you find the problem reply and let me know! Tag: Cant restore the database backup in SQL server 2005?
  - 3
    - suggestions This is what you are looking for, "parsing non-standard files" http://msdn2.microsoft.com/en-us/ms345160.aspx Tag: Cant restore the database backup in SQL server 2005?
  - 4
    - Cannot get SSCE 3.5 beta 2 to work You can - in 32 bit mode. That's the way most applications work on 64 bit OS today. Tag: Cant restore the database backup in SQL server 2005?
  - 5
    - Database Mail Command Not Supported - Again I have three SQL 2005 servers. Only one will send mail successfully using database mail. The only difference I can see in the way they are set up is that, in the database mail log, the server that works shows a last_mod_by of the domain account that runs SQL Server. The ones that do not work show "sa" as the last_mod_by in the database mail log. It seems that something seems to be trying execute as "sa" rather than as the domain account we wish to run everything. I cannot find where that might be set. I have gone through all the troubleshooting guides and surface area config stuff that I could find and am stumped. Does anyone have any more suggestions I am pointing all three servers to the same SMTP relay, have checked A/V to be sure port 25 blocking is not on, checked the settings in surface area config tool, etc. Anyone have any suggestions Here is a snippet of the latest few records in the log: 86 error 2007-10-24 11:28:46.280 The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-10-24T11:28:46). Exception Message: Cannot send mails to mail server. (Command not implemented. The server response was: Command not Supported). ) 5652 17 NULL 2007-10-24 11:28:46.280 sa 85 information 2007-10-24 11:28:46.187 DatabaseMail process is started 5652 NULL NULL 2007-10-24 11:28:46.187 DOMAIN_NAME\zz_testadmin-test-chy 84 success 2007-10-24 11:28:43.393 Activation successful. NULL NULL NULL 2007-10-24 11:28:43.393 sa 83 success 2007-10-24 11:28:43.377 Activation successful. NULL NULL NULL 2007-10-24 11:28:43.377 sa 82 information 2007-10-24 11:12:21.897 DatabaseMail process is shutting down 6032 NULL NULL 2007-10-24 11:12:21.897 DOMAIN_NAME\zz_testadmin-test-chy 81 error 2007-10-24 11:02:21.907 The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-10-24T11:02:21). Exception Message: Cannot send mails to mail server. (Command not implemented. The server response was: Command not Supported). ) 6032 16 NULL 2007-10-24 11:02:21.907 sa 80 error 2007-10-24 11:01:21.877 The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-10-24T11:01:21). Exception Message: Cannot send mails to mail server. (Command not implemented. The server response was: Command not Supported). ) 6032 16 NULL 2007-10-24 11:01:21.877 sa Tag: Cant restore the database backup in SQL server 2005?
  - 6
    - Generate a cube in Standard Edition I just figured this out. Comment out this stuff in CreateCurrencyRatesMeasureGroup() //average of children is not allowed. //meas.AggregateFunction = AggregationFunction.AverageOfChildren; //last non empty is not allowed. //meas.AggregateFunction = AggregationFunction.LastNonEmpty; Tag: Cant restore the database backup in SQL server 2005?
  - 7
    - SQL Server 2000 - Generating new field containing the sum of other rows Hi guys, This one seems to be a difficult one: I have a table called "myTable" with a field called "myField" (which contains only numbers). I need to generate a new field where each row is the sum of the row in field "myField" plus all the values in the rows before it. something like this: myField NewField 100 100 = 100+0 200 300 = (200+100) 300 600 = (300+200+100) 400 1000 = (400+300+200+100) 500 1500 = (500+400+300+200+100) I'll apprecciate any smart help. Aldo. Tag: Cant restore the database backup in SQL server 2005?
  - 8
    - Checking Job Status using T-SQL I get too many recrod when i use this method Select DISTINCT run_status From msdb..sysjobhistory as sysjobhistory Join msdb..sysjobs as sysjobs on sysjobhistory.job_id=sysjobhistory.job_id Where name = 'STR Balance' I just want to get the current run_stauts and store it in a variable. I have refer to SP_Help_Job but i do not know how can i return the run_Status Tag: Cant restore the database backup in SQL server 2005?
  - 9
    - Whats does this mean ??? --- SQL Server has encountered 1964 occurrence(s) of IO requests taking longer than 15 seconds Hello, I see the following error on the sql server log of one of our sql servers running sql 2000 with sp4. SQL Server has encountered 1964 occurrence(s) of IO requests taking longer than 15 seconds to complete on file [h:\tempdb.mdf] in database [tempdb] (2). The OS file handle is 0x00000534. The offset of the latest long IO is: 0x0000002b09e000 Any idea as to what might be causing this error. Appreciate any comments. Thanks! Tag: Cant restore the database backup in SQL server 2005?
  - 10
    - Repeat Report Title On EveryPage Hi Dave DGNSP posted a solution to your problem in this thread... http://forums.microsoft.com/technet/ShowPost.aspx postid=1379855&siteid=17 but it doesn't help poor old me! Good luck! Graham Tag: Cant restore the database backup in SQL server 2005?
  - 11
    - Cascading Date for Filter Hi, Yeah. e.g. Year= 2006 Measure Month Jan 20 Feb 30 March 40 april 50 May 60 .. Year= 2007 Measure Month Jan 90 Feb 80 March 75 april 60 May 40 .. This way the month is independent of the year, if you don't slice by year you will get ALL year values for that month. So Jan will be 2005+2006+2007... values. Year= ALL Measure Month Jan 110 Feb 110 March 115 april 110 May 100 If you have a copy of the adventure works database, the "month of year" attribute is the one you want to create. They only really use Month+Year in the hierarchies and have year, month, day .. as a seperate attributes. HTH Matt Tag: Cant restore the database backup in SQL server 2005?
  - 12
    - Function with Dynamic Column Name without Execute statement Hmm, can you flesh out this a bit more with some example code Not sure I quite understand what you mean... Tag: Cant restore the database backup in SQL server 2005?
  - 13
    - Digest Authorization on HTTP Endpoint Looks like this was it. Our domain controller is running Windows 2000 (planned upgrade to 2003 this quarter though), and digest is not enabled - doing so must go through a chain of security people it seems. Thanks for pointing me in the right direction - it may be a while before it's working yet, but at least I'm off the hook for now. Tag: Cant restore the database backup in SQL server 2005?
  - 14
    - Query with CASE and NULL values *** !, it work perfect, i think you know this !! like we say in Argentina: "Sos Groso !!"..... is like say You are Big !... I think so.. Tag: Cant restore the database backup in SQL server 2005?
  - 15
    - SQLServer Error: 15404 with Active Directory I have to admit I am also a little bit surprised. I have never faced a scenario where an account is getting an explicit access denied when querying information about itself and all its groups, but succeeds while querying information about other principals and objects in the AD. I agree with you, check with your AD administrator, probably they have some security policy we are not aware of that may be causing this problem. I personally don��t think the problem is regarding any permission to execute a system stored proc (EXECUTE AS should call the code directly); but let��s wait until we have more information from the AD admins regarding this issue. One more thing you can try: Can you install a test-only copy of SQL Server 2005 (i.e. SQL Server Express) using a different account for the service (it could be a different machine). If you can install it, can you try the same EXECUTE AS LOGIN tests Thanks a lot, -Raul Garcia SDE/T SQL Server Engine Tag: Cant restore the database backup in SQL server 2005?
  - 16
    - Sql server 2000 - xp_sendmail stored procedure I have no idea about how can I use xp_sendmail when I try to use it this error displayed on the screen. There is no default mail client or the current mail client cannot fulfill the messaging request . Please run Microsoft Outlook and set it as the default mail ... Tag: Cant restore the database backup in SQL server 2005?

shyam1aqua

Hi,

System.Data.SqlClient.SqlError: There is insufficient free space on disk volume 'C:\' to create the database. The database requires 83679641600 additional free bytes, while only 46151348224 bytes are available. (Microsoft.SqlServer.Smo)

Thanks,

S.Shyam.

Top

Re: Cant restore the database backup in SQL server 2005?

Euan Garden

The error message is pretty clear, you do not have enough space on the drive that you are restoring to

Top