Refreshing Gadget Content problem

Sidebar Gadget Development

- Previous
  - 1
    - Astoria.Client futures? On a quick look it seems as if the client library doesn't require WCF, i.e. .NET 3.0.+, with just plain 2.0 System.Net.HttpWebResponse/Resquest(!) used. Is that the longer term plan (it's ok to guess :-) Plus, as well as a JSON serializer/deseriler, an object statemanager and a nice wrapper over the GET/POST calls, what would I lose if we don't use the client side library Is the longer term strategy to keep the Astoria client/service as some that should be always be used together or is it ok to 'go naked' on the client and just use the service side wrangling David Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 2
    - Disable start-button to get into kiosk Hi Michael, thanks for your reply. Unfortunately I already did that. The result was that the taskbar was still visible however the system crashed when I was pressing the windows button around three times in a row. Therefor I hoped to get a few lines. By now I tried a different approach. I tried to access the buttons with some classes I found here http://www.opennetcf.org/forums/topic.asp TOPIC_ID=283 The problem is that this program works fine for most of the buttons - just not for the windows /start button. So I digged a little deeper and I found out that the windows button is not within the registry (at least not where the other three buttons are). So if you have any good idea that might help me with that problem - I am anxious to try it out. Thank you very much for your support I also worked on the SHFullScreen Solution - however it doesn't work out for me. Its not crashing anymore (this was due to the HideTaskbar function, which I deleted), however when I try my code it the taskbar is always up to the very front of the application and I don't know why. Therefor I posted my application in the next thread. Please have a glance at it - I just have no clue where the mistake might be. Thank you very much. Keep up the good work Greetings Taggert Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 3
    - Could not receive SMS Thank you for replying, I am new to this kind of application and this problem has already bugging me for almost two month! I already tried everything I can and still unable to make it work. Alex can you explain to me more detail what should I do so that these 2 application will work as it shown here Please help me, really appreciate it! Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 4
    - how can i use the webbrowser control? Hi, Can any one suggest a good link which gives complete information on using a webbrowser control. I want to know 1. How to set the border for the control. 2. How to set the background image for the control 3. How to restrict the context menu from popping up on the control I tried to set the "background " attribute of the <body> tag and assigned the string as the value for the DocumentText property of the control. But it does'nt work. It doesn't display the image on the webrowser. But when "bgcolor" is assigned the same way, it works! It displays the color. What could be wrong - Hari Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 5
    - webBrowser documentText issue nobody knowns another better solution this one is slow and you have to handle the history , and everytime you go back you have to reload the page.. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 6
    - How can i send a message from one form to another form(smartphone) Hi,nice man. I tried your method in my application, and it works. Thanks for your help, i think i will use it as a nice tip in the other applications. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 7
    - How do I package the .NetCF with my SmartPhone Application? I've been through those plenty of times. I have no problem creating a CAB file or install for the custom build application. those articles do not have any references to including the installation of the .Net CF in your deployment package. Windows Mobile 5 doesn't have the .Net Compact Framework installed by default, which is required on the device in order to run the custom application. That is not automatically included/installed via my custom app installation. How do I configure my deployment package to deploy .Net CF at the same time as my custom app Thanks Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 8
    - fetching recipient in Pocket PC 2002 Hello, which API i use for fetching email recipient in pocket PC 2002 plz reply me. if u have code do paste it. Thanks -Salman Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 9
    - compact/ mobile databases Access in mobile applications Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 10
    - Mobile 5 C# Project streaming WMV files thanks for the link. I don't think it helps though. What I really need is for the WMP dll to act like the typical Windows Player except that I need to be able to send it URI's and retreive bookmarks from it. If I could actually catch the CWMPEventDispatch::Invoke events... I may be able to do something, but my code doesn't.... it's like another entity window takes over the media player ) I can't even freakin get rid of the SIP after I return from fullscreen ..... If I could actually do this ... http://msdn2.microsoft.com/en-us/library/bb248590.aspx but the control is not supported in Mobile CE ( i think... right ) seriously, what I want to do seems simple .... why does it not work Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 11
    - Advice about using GPS (port?) That's excellent, and the GPS API was exactly the thing I was missing. I really don't want the hassle of opening COM ports...or rather ensuring I don't break other applications running. Thanks. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 12
    - Byte Array to Image.. Hi, sanjay6036 wrote: Can aybody tell me how i can convert Byte array to images .I do not have any idea regarding this . and how i can perform Scaling on images ....please i waiting for your reply.. What is the format of the data in your byte array Is this raw RGB or BGR data, or does the byte array contain some other type of image such as a PNG or BMP encoded image The solution to your problem will depend upon the type of image data your byte array contains. Hope this helps, Christopher Fairbairn. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 13
    - Changing WinCE device language programmatically(Urgent) I m sorry for using word urgent. But apparently i havent got any help as of now . Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 14
    - SMART FAILURE PREDICTED ON HARD DISK 0: TOSHIBA Hello to all, I have 2 laptops both are TOSHIBA Satellite M55-S325. Some times back i switched the HDD and everything went fine, windows started normally. I did it for one day only just to test something then switched them back to their original places... Yesterday i started laptop 1, a "SMART FAILURE PREDICTED ON HARD DISK 0: TOSHIBA MK1032GAXA WARNING: IMMEDIATELY BACKUP YOUR DATA AND REPLACE YOUR HARD DISK DRIVE. A FAILURE MAY BE IMMINENT" message was showing whenever i start the laptop.. So what i did, i took the HDD from laptop 2 and replaced it in laptop 1, BUT the message is still coming up with this HDD... so i thought both HDD are about to go with the wind.. i went to the computer market and bought a new HDD (TOSHIBA) and when i replaced it in laptop1, i got the same message.. so i thought there is something wrong with the new HDD, i went and got it changed, went back with another new HDD, got it installed in the laptop and the bad news is i got the same message... I tried 4 HDDs, 2 of them were brand new.. 4 HDD can not be all failing... there must be something else.. Please help me in this issue.. Any thought will be appreciated. Thank you, Yazen Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 15
    - Developing app's for WinCE 4.1 under VS.NET 2005 Are you sure it will help with WinCE 4.1 ! I have found similar instructions, but for WinCE 4.2. Anyway, which file, and where is stored on loacl disc, must I copy onto remote device Angello Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 16
    - Windows ce 5.0 on vs2005.... can i access a .cdb file (pocket access)??? oh Thanks for the answer....... but do you know any of this 3rd party providers because i need to develop an aplication that ll get data from a txt and then write on a access data base everything on a hand held (windows ce 5.0)... and thank you again! Elton Antunes Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
- Next
  - 1
    - CCommandbar Menu: add popup menu to the menu Hi, I already succeed to do this, But I have a different problem. Now I am trying to get a message when user click no the menu. Do you know what message is it Thank you Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 2
    - How to Get Proxy Address on WinCE(C#) Dear rick, WebProxy.GetDefaultProxy() method has been obsolete since .NET Compact Framework. And it will not gain the value we expected. Instead, it's recommended to use GlobalProxySelection Class with its Select method. Similar topics can be found when you search the key word in our forum, following may help you: http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=688350&SiteID=1 Regards, Zero Dai - MSFT Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 3
    - Launching a clsid-based control panel Thanks for responding. I can't tell you much about the clsid option, as I've never found any documentation on this. If there is any documentation available on this I would love to see it. But if you look at the abbreviated file in my initial post, you can see what the root xml file looks like. I've been able to gather that this is the file that drives the menu on the normal settings.exe (when run without parameters). Several of those lines use the familiar .cpl.xml files, but some of them just provide a clsid instead. For example, the Power settings, which is the last one in that example file. There is no .cpl.xml file in that case so I don't know how to launch it (actually there is a power.cpl.xml file on this device, the Vox, but that particular file is not valid and returns an error if you try to load it directly). <cpl-link clsid="{4B7CEEDD-7179-4a8b-AB92-340545B0AB07}" res="16330"/> Some recent devices are using this method for certain customized control panels, but I don't know if there is any way to launch those panels directly without going through the settings menu (and for that matter, I don't automatically know which panel to launch since I'm not aware of anything that ties that clsid to the name of the control panel I seek). - Todd Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 4
    - Sending Messages from a CE Device to PC and back Thanks for your reply... I had already looked at all of these previous sugestions before posting hence the new post. I can ping both the desktop and the device, is there a way to verify that everything is configured correctly ...I'm sure I must be over looking something Thanks again Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 5
    - Problem with Device Emulator Thanks. I tried that way. It only displays "connecting..." dialog but didn't response further. I have also tried closing and reopening VS2005, and also restarted my computer. But the problem still exists. How can I do Need I restall it Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 6
    - Lock Device http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=361890&SiteID=1 Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 7
    - Can I develope an MFC application for windows mobile 2005 based smartphone ? Thanx for the reply. Actually I am trying in MFC and facing some problem while getting the softkey controls. I succeeded in getting the controls in Win32 using switch (LOWORD(wParam)) but in MFC I could not the stuff till now. Ne suggestion regarding this. regards, Debdeep. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 8
    - update messages on screen.. thx it helped not with every message but with a lot of them! what i am thinking is if the DoEvents() "pushes" delegates to be done or label.text="sth" executions .... logic says the former one but practice shows that the later ones are also shown... Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 9
    - rerieving the status of phone hi raja, how to include the above assembly reference . is there any method to include the assembly reference . i added ur above code . but its showing compilation errors . could u help me in this . thanks sadiq Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 10
    - How to write into Pocket word or Pocket excel using compactframework 2.0 (c#) I need to write data(text ) into Pocket word or excel .. writing into txt file works fine .Any ideas on word or excel API in pocket PC (windows mobile 5.0) Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 11
    - Unable to set focus on Form after using ShowDialog() Hi All, I am creating an application that uses multiple forms. The structure is like as under: Main Form----> Child Form-1, Child Form-2, Child Form-n ----> Detail Form-1 , Detail Form-2 , Detail Form-n Main form is the starting form. It uses ListForm.Show() for opening Child Forms. While Child forms use DetailForm.ShowDialog() to open Detail Forms. When I switch from Detail form to Main Form (after setting DetailForm.DialogResult = DialogResult.Cancel) the focus is not set to the Main Form. Attached is the snippet of the source code: class MainForm : Form { private static MainForm _instance; public static MainForm Instance { get { if (_instance == null ) _instance = new MainForm (); return _instance; } } private void showChildForm() { ChildForm.Instance.Show(); } } class ChildForm: Form { private static ChildForm _instance; private bool value; public static ChildForm Instance { get { if (_instance == null ) _instance = new ChildForm (); return _instance; } } private void showDetailsForm() { DetailsForm form = new DetailsForm(); DialogResult result = form.ShowDialog(); if(result == DialogResult.OK) value = true; else value = true; } } class DetailForm: Form { private void mnuSwitch_Click( object sender, EventArgs e) { this.DialogResult = DialogResult.Cancel; MainForm.Instance.Show(); } } Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 12
    - Device Application Installer See this . Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 13
    - Checking for internet connectivity I see, thank you. i'll read up on that. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 14
    - Make own keyboard in WM5, CSharp hmm thanks Can you please provide me any sample or information where I should search for some SIP samples/tutorials I searched the internet with google for many hours but it seems there is no documentation about creating SIP keyboards I don't believe it but still I haven't found anything about creating SIP keyboards Can you please provide me... anything Thanks very much in advance Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 15
    - getting System.FormatException in the Sub Main of VB.Net app Thanks for your reply I turned off Option Strict and everthing that was throwing that error works fine now. I understand the point you made of processing the class as a string. Is that being done in the Designer Generated Code How could I find the culprit Ryan Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development
  - 16
    - Pocket PC serial number I've check this on my iPAQ but I don't seem to have this file. Tag: Sidebar Gadget Development Refreshing Gadget Content problem Smart Device Development

Byron_SpexFox

EDIT: I have the gadget refreshing now, but how do I make it refresh only certain elements I'd be great to have just the SSID refresh when needed, or the Signal Strength.

Re: Sidebar Gadget Development Refreshing Gadget Content problem

Jonathan Abbott

How are you currently refreshing it

Setup a refresh function, running on a timer, that only updates the elements you want to update. eg

window.setInterval(myRefreshFunction, 5000); //5 secs
...
function myRefreshFunction() {

// update the elements

}

Re: Sidebar Gadget Development Refreshing Gadget Content problem

Byron_SpexFox

That is the way the gadget currently refreshes, but how do I make it refresh only certain elements Example:

<span id="tester">[javascript innertext that changes]</span>

What would you put in the myRefreshFunction() for code =P That's what I don't know.

Re: Sidebar Gadget Development Refreshing Gadget Content problem

Jonathan Abbott

window.setInterval(myRefreshFunction, 5000); //5 secs
...
function myRefreshFunction() {

tester.innerText = "...";

}