Device Application Installer

Smart Devices VB and C# Projects

- Previous
  - 1
    - Changing WinCE device language programmatically(Urgent) I m sorry for using word urgent. But apparently i havent got any help as of now . Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 2
    - SMART FAILURE PREDICTED ON HARD DISK 0: TOSHIBA Hello to all, I have 2 laptops both are TOSHIBA Satellite M55-S325. Some times back i switched the HDD and everything went fine, windows started normally. I did it for one day only just to test something then switched them back to their original places... Yesterday i started laptop 1, a "SMART FAILURE PREDICTED ON HARD DISK 0: TOSHIBA MK1032GAXA WARNING: IMMEDIATELY BACKUP YOUR DATA AND REPLACE YOUR HARD DISK DRIVE. A FAILURE MAY BE IMMINENT" message was showing whenever i start the laptop.. So what i did, i took the HDD from laptop 2 and replaced it in laptop 1, BUT the message is still coming up with this HDD... so i thought both HDD are about to go with the wind.. i went to the computer market and bought a new HDD (TOSHIBA) and when i replaced it in laptop1, i got the same message.. so i thought there is something wrong with the new HDD, i went and got it changed, went back with another new HDD, got it installed in the laptop and the bad news is i got the same message... I tried 4 HDDs, 2 of them were brand new.. 4 HDD can not be all failing... there must be something else.. Please help me in this issue.. Any thought will be appreciated. Thank you, Yazen Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 3
    - Developing app's for WinCE 4.1 under VS.NET 2005 Are you sure it will help with WinCE 4.1 ! I have found similar instructions, but for WinCE 4.2. Anyway, which file, and where is stored on loacl disc, must I copy onto remote device Angello Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 4
    - Windows ce 5.0 on vs2005.... can i access a .cdb file (pocket access)??? oh Thanks for the answer....... but do you know any of this 3rd party providers because i need to develop an aplication that ll get data from a txt and then write on a access data base everything on a hand held (windows ce 5.0)... and thank you again! Elton Antunes Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 5
    - Refreshing Gadget Content problem That is the way the gadget currently refreshes, but how do I make it refresh only certain elements Example: <span id="tester">[javascript innertext that changes]</span> What would you put in the myRefreshFunction() for code =P That's what I don't know. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 6
    - CCommandbar Menu: add popup menu to the menu Hi, I already succeed to do this, But I have a different problem. Now I am trying to get a message when user click no the menu. Do you know what message is it Thank you Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 7
    - How to Get Proxy Address on WinCE(C#) Dear rick, WebProxy.GetDefaultProxy() method has been obsolete since .NET Compact Framework. And it will not gain the value we expected. Instead, it's recommended to use GlobalProxySelection Class with its Select method. Similar topics can be found when you search the key word in our forum, following may help you: http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=688350&SiteID=1 Regards, Zero Dai - MSFT Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 8
    - Launching a clsid-based control panel Thanks for responding. I can't tell you much about the clsid option, as I've never found any documentation on this. If there is any documentation available on this I would love to see it. But if you look at the abbreviated file in my initial post, you can see what the root xml file looks like. I've been able to gather that this is the file that drives the menu on the normal settings.exe (when run without parameters). Several of those lines use the familiar .cpl.xml files, but some of them just provide a clsid instead. For example, the Power settings, which is the last one in that example file. There is no .cpl.xml file in that case so I don't know how to launch it (actually there is a power.cpl.xml file on this device, the Vox, but that particular file is not valid and returns an error if you try to load it directly). <cpl-link clsid="{4B7CEEDD-7179-4a8b-AB92-340545B0AB07}" res="16330"/> Some recent devices are using this method for certain customized control panels, but I don't know if there is any way to launch those panels directly without going through the settings menu (and for that matter, I don't automatically know which panel to launch since I'm not aware of anything that ties that clsid to the name of the control panel I seek). - Todd Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 9
    - Sending Messages from a CE Device to PC and back Thanks for your reply... I had already looked at all of these previous sugestions before posting hence the new post. I can ping both the desktop and the device, is there a way to verify that everything is configured correctly ...I'm sure I must be over looking something Thanks again Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 10
    - Problem with Device Emulator Thanks. I tried that way. It only displays "connecting..." dialog but didn't response further. I have also tried closing and reopening VS2005, and also restarted my computer. But the problem still exists. How can I do Need I restall it Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 11
    - Lock Device http://forums.microsoft.com/MSDN/ShowPost.aspx PostID=361890&SiteID=1 Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 12
    - Can I develope an MFC application for windows mobile 2005 based smartphone ? Thanx for the reply. Actually I am trying in MFC and facing some problem while getting the softkey controls. I succeeded in getting the controls in Win32 using switch (LOWORD(wParam)) but in MFC I could not the stuff till now. Ne suggestion regarding this. regards, Debdeep. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 13
    - update messages on screen.. thx it helped not with every message but with a lot of them! what i am thinking is if the DoEvents() "pushes" delegates to be done or label.text="sth" executions .... logic says the former one but practice shows that the later ones are also shown... Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 14
    - rerieving the status of phone hi raja, how to include the above assembly reference . is there any method to include the assembly reference . i added ur above code . but its showing compilation errors . could u help me in this . thanks sadiq Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 15
    - How to write into Pocket word or Pocket excel using compactframework 2.0 (c#) I need to write data(text ) into Pocket word or excel .. writing into txt file works fine .Any ideas on word or excel API in pocket PC (windows mobile 5.0) Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 16
    - Unable to set focus on Form after using ShowDialog() Hi All, I am creating an application that uses multiple forms. The structure is like as under: Main Form----> Child Form-1, Child Form-2, Child Form-n ----> Detail Form-1 , Detail Form-2 , Detail Form-n Main form is the starting form. It uses ListForm.Show() for opening Child Forms. While Child forms use DetailForm.ShowDialog() to open Detail Forms. When I switch from Detail form to Main Form (after setting DetailForm.DialogResult = DialogResult.Cancel) the focus is not set to the Main Form. Attached is the snippet of the source code: class MainForm : Form { private static MainForm _instance; public static MainForm Instance { get { if (_instance == null ) _instance = new MainForm (); return _instance; } } private void showChildForm() { ChildForm.Instance.Show(); } } class ChildForm: Form { private static ChildForm _instance; private bool value; public static ChildForm Instance { get { if (_instance == null ) _instance = new ChildForm (); return _instance; } } private void showDetailsForm() { DetailsForm form = new DetailsForm(); DialogResult result = form.ShowDialog(); if(result == DialogResult.OK) value = true; else value = true; } } class DetailForm: Form { private void mnuSwitch_Click( object sender, EventArgs e) { this.DialogResult = DialogResult.Cancel; MainForm.Instance.Show(); } } Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
- Next
  - 1
    - Checking for internet connectivity I see, thank you. i'll read up on that. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 2
    - Make own keyboard in WM5, CSharp hmm thanks Can you please provide me any sample or information where I should search for some SIP samples/tutorials I searched the internet with google for many hours but it seems there is no documentation about creating SIP keyboards I don't believe it but still I haven't found anything about creating SIP keyboards Can you please provide me... anything Thanks very much in advance Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 3
    - getting System.FormatException in the Sub Main of VB.Net app Thanks for your reply I turned off Option Strict and everthing that was throwing that error works fine now. I understand the point you made of processing the class as a string. Is that being done in the Designer Generated Code How could I find the culprit Ryan Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 4
    - Pocket PC serial number I've check this on my iPAQ but I don't seem to have this file. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 5
    - Hiding grid columns in a datagrid. Hello, Not sure I understood what you. Please correct me if I am wrong. Do not add a column style. So I commentted out all the columns that I didn't want to display. However, the code below displayed all the columns. As the datatable contains all the columns anyway I think this will always display all columns. Any other suggestions would be must helpful. Thanks for your help, Code Block DataGridTableStyle tblStyle = new DataGridTableStyle (); tblStyle.MappingName = "OrderDetail" ; grdBeverages.TableStyles.Add(tblStyle); grdBeverages.DataSource = DS.OrderDetail.DefaultView; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["OrderDetailID"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["BeverageID"].Width = 0; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "Beverage" ].Width = 50; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "BeverageQty" ].Width = 40; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "BeverageQty" ].HeaderText = "Qty" ; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "BeverageCost" ].Width = 40; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "BeverageCost" ].HeaderText = "Cost" ; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["StarterID"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["Starter"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["StarterQty"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["StarterCost"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["MaincourseID"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["Maincourse"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["MaincourseQty"].Width = 0; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["MaincourseCost"].Width = 0; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "TotalCost" ].Width = 40; grdBeverages.TableStyles[ "OrderDetail" ].GridColumnStyles[ "totalCost" ].HeaderText = "Cost" ; //grdBeverages.TableStyles["OrderDetail"].GridColumnStyles["OrderID"].Width = 0; Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 6
    - ZUNE gadget Just thought it would be cool for some one to build a Zune Gadget! Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 7
    - Flyout Memory release Hello, From what I've seen so far once the flyout page is shown the memory allocated for it is never reclaimed. I was wondering if anyone knows a way I can reclaim/unload the memory cosumed by the flyout page on the onHide event. Thanks. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 8
    - onChange event not working Check you're not getting an error in the code, the function running once and never again is a classic symptom on an exception occuring. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 9
    - Activex and windows services Hi Tom This forum deals only with Smart device development topics. Please post your question in the appropriate desktop windows newsgroup ( http://msdn.microsoft.com/newsgroups/default.aspx ) Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 10
    - Does anybody know where I can get the format for encoding PVRTC4 textures? PVRTC4 textures are used by the Intel 2700G chip. It is a proprietary texture format that is used when programming this chip and is used by a whole lot of D3DM source code examples supplied by Imagination Technologies. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 11
    - WScript.Shell in x64 What error does RegWrite return I've seen some mention of RegWrite returning an error on 64bit, but still writing the registry entry. I really must install a 64bit Vista to test this out. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 12
    - Set ActiveSync Serial Connection Speed Thanks I was able to find it at and set the following and it worked: [HKEY_CURRENT_USER\ControlPanel\Comm] "AutoCnct"=dword:00000001 "Cnct"="`115200 Default" "LastSerial"="`57600 Default" Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 13
    - How to read SMS from Inbox in C# How can I access the sms messages from my inbox using C# I try to create an aplication where I can quote from those messages. David Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 14
    - prblem connection in socket (in vs2003 work but in vs2005 give exception) hi Ilys Tumanov Thanks for reply My Application Code is try { // Establish the remote endpoint for the socket. IPEndPoint remoteEP = new IPEndPoint ( IPAddress .Parse( "192.168.0.48" ) , 11000); // Create a TCP/IP socket. Socket soSender = new Socket ( AddressFamily .InterNetwork, SocketType .Stream, ProtocolType .Tcp); // Connect the socket to the remote endpoint. Catch any errors. try { soSender.Connect(remoteEP); MessageBox .Show( "Socket Connect " ); } catch ( ArgumentNullException ane) { MessageBox .Show( "ArgumentNullExcption " + ane.Message); } catch ( SocketException se) { MessageBox .Show( "SocketException " + se.Message); } catch ( Exception ex) { MessageBox .Show( "SocketException " + ex.Message); } } catch ( Exception exp) { MessageBox .Show(exp.Message); } this code connect with sever application in vs2003 without any exception but in vs2005 it give the Excepton .The Details of Exception are Type SocketException Message A socket operation was attempted to an unreachable host stack trace at System.Net.Sockets.Socket.ConnectNoCheck() at System.Net.Sockets.Socket.Connect() at TestApplication.Form1.button1_Click() at System.Windows.Forms.Control.OnClick() at System.Windows.Forms.Button.OnClick() at System.Windows.Forms.ButtonBase.WnProc() at System.Windows.Forms.Control._InternalWnProc() at Microsoft.AGL.Forms.EVL.EnterMainLoop() at System.Windows.Forms.Application.Run() at TestApplication.Program.Main() Erro Code 10065 i set Poket PC SE Emulator 2003 form Tool + Option + Device in Properties i set DMA Transport in Transport box. Thanks and regards Nisar Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 15
    - Does Visual Studio Standard Edition support debugging a mobile device in the cradle I am researching the purchase of Visual Studio 2005 and the specs say that both Standard edition and Professional edition support mobile device development. However, the Standard edition specs also say that it only supports "Local" debugging. Does that mean I cannot debug a mobile device in a cradle connected to the PC via USB cable, and instead have to be able to run the program in the emulator on the PC to debug Or is that scenario not considered "remote" debugging Can someone who has Visual Studio 2005 Standard edition and has tried to debug a mobile device in a USB cradle please let me know one way or the other If you haven't actually tried it and would just be guessing, please do not reply. Thank you. Thanks, Brad Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development
  - 16
    - Windows Mobile CreateImageSurface error Yes, you understood me correctly. That HResult is D3DMERR_DRIVERUNSUPPORTED but I thought I tested for that in the caps. What caps do I need to check so that I know beforehand that the device does not support CreateImageSurface. As a side note I found a workaround. I create a IDierect3DMobileTexture and then just use GetSurfaceLevel(0, &ptSurface) to create a surface. Kind of funny that the device will support creating a texture (which is a group of surfaces) but not a single surface. Tag: Smart Devices VB and C# Projects Device Application Installer Smart Device Development

dabd

I created a CAB for my application, but the user has to manually copy the file to the device with ActiveSync and click the CAB file to install the application.
How do I create an automated installer for my application

Thanks.

Top

Re: Smart Devices VB and C# Projects Device Application Installer

JamesE

Try this link:

http://www.microsoft.com/uk/msdn/events/nuggets.aspx

When you get there, select Windows Mobile from the Technology list and click search. Check out the webcast "Automatically installing from SD and CF cards".

Hope that helps.

Top

Re: Smart Devices VB and C# Projects Device Application Installer

Ilya Tumanov

See this.

Top